Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →Focuses on a specific preventive maintenance mod: installing an Otis Innovations vented dipstick kit on the 1025R front axle to relieve pressure and protect axle seals. The video walks through the full install, routing the vent hose, cycling the axle to set hose length, and zip-tie routing, and briefly covers a separate 2038R install. Best for 1025R owners considering this niche but practical upgrade.
Tractor Time with Tim is an owner-operator channel where the host works through projects on his own machines, with affiliate/coupon code relationships disclosed for products shown.
Pressure or vacuum can build in the axle oil, straining the seals behind the front tire, which can cause seepage, separate from simple overloading of the axle.
Deere makes a vented dipstick for larger models like the 2 and 3 series, but it only relieves outward pressure and does not let air back in.
The install instructions say a clamp is optional, and the hose went on tight enough that the installer concluded a clamp wasn't needed.
The VDS-3 kit fits the 2 R's, the 3 E's, and the 3 R's, so it covers a broad range of models.
| John Deere 1025R | John Deere 2038R | |
|---|---|---|
| PTO horsepower | 18 hp | 30.4 hp |
| Loader lift capacity | Not Published | 1,949 lbf (at pivot pin) |
| 3-point lift capacity | 1,177 lb | Not Published |
| Hydraulic flow | 3.5 gpm | 5.3 gpm |
