Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →Focuses on a very specific pain point: attaching a John Deere 270B backhoe to the large-frame 2R series (2032R/2038R) when the subframe isn't sitting flat, what the host calls being 'in a funk.' It walks through the ideal hookup, a low-tech recovery workaround, and a purpose-built kit solution, then closes with hydraulic coupler tips. Most useful to 2R owners struggling with a stubborn backhoe attachment.
Remove the top link but leave the lift links on, connect the subframe piece between the lift arms, back up carefully, and lower the three-point hitch while watching the frame stay flat on the ground.
As a poor man's fix, push the dipper stick down with the loader and prop something under it to get it back on the ground before reattaching.
Half-inch ISO A5675 couplers, replacing the original three-eighths inch incompatible fittings, and expect some oil spillage when disconnecting them.