Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a short, practical how-to on removing and reattaching a hydraulic grapple on a Kubota B2601, not a review or walkaround. The owner demonstrates cycling the buttons to relieve line pressure before disconnecting, popping the flat-faced couplers, pulling the quick attach, and reattaching with a tip about checking the pins seat fully. Useful for B2601 owners who already have a grapple and want a quick procedural reference.
Cycle both buttons to relieve line pressure, open the quick attach, push the indent to remove each hydraulic line, then pull the arms out to free the grapple.
Cycling the buttons relieves pressure in the lines, making it much easier to reconnect them later; skipping this step makes reattachment a real pain.
Reach underneath and make sure the pins are all the way down; if they are not, the grapple might come off while in use.