Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →Viewer-requested how-to focused specifically on removing a brush hog from a three-point hitch, a topic Mike notes he'd never covered despite many videos on attachment. He walks through all four connection points (two lower link arms, top link, PTO) and explains stabilizer variations on smaller tractors. Closes with a practical tip on using rubber straps to keep lower arms from flopping. Good fit for new rural property owners unfamiliar with three-point basics.
Tractor Mike is a longtime tractor-industry insider with decades of hands-on experience in the equipment business. He built his channel to help first-time and rural buyers make confident decisions, and his guidance comes from that deep, long-term background rather than a sales pitch.
Drop it to the ground, turn off the tractor, loosen stabilizers if needed, pull the lynch pins on both lower link arms, remove the top link pin, then disconnect the PTO.
If stabilizers go from the inside into the tractor frame, loosen the turn buckle so the lower arms can move out before removing the implement.
There are three types: a push rod you push in and pull back, a twist mechanism that releases ball bearings, or a collar you pull back and out.
Use rubber straps hooked to the hole where the stabilizer mounts on each side, which keeps the arms narrow and together.