Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A hands-on owner demonstration of detaching a backhoe from an LS Exeter 3135, noting the steps apply broadly to similar setups. It walks through stabilizer leg positioning, pin removal, weight balancing, and disconnecting hydraulic quick-connect lines in real time. The footage is unscripted and a bit rough, including a discovered hydraulic leak mid-removal, making it most useful for LS owners who want a realistic, unpolished reference before attempting the job themselves.
Engage hydraulics, lift the stabilizer leg brackets, lower the landing legs to take the weight, pull the three pins, lift the backhoe out, then disconnect the hydraulic quick-connect lines.
There are three pins: two outer pins on either side plus a bracket that slips over a third point underneath.
Yes, the video says you'll lose a little hydraulic fluid when pulling the quick disconnects, but not enough to really matter.
During this removal a hydraulic hose pulled loose on the bottom, causing a leak that needed to be fixed afterward.