Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a DIY fabrication video, not a product demo: the owner improvises a way to mount a Woods RB72 rear blade onto a tractor's front bucket using a homemade quick-coupler bracket. It covers measuring, welding nuts and plates, bolting through the bucket bottom, and fitting the plow's upper link, with real trial-and-error reasoning throughout. Best for viewers wanting a fabrication walkthrough, not a tractor review or spec comparison.
Posted by the Work with Kevin channel, an owner working on his own equipment and documenting a homemade fix in real time.
Weld a nut to a steel plate, bolt it through the pre-drilled bottom of the bucket, and build a bracket to align the upper link so the blade clamps on as a quick coupler.
The front bucket's working width is about 5 feet, narrower than the rear wheel width, so snow often falls back into the bucket and plowing takes forever.
The Woods RB72 is 6 feet wide, wider than the tractor's 5 foot front bucket, and the owner felt the tractor could handle something larger.