Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →Distinct for being filmed mid-purchase: Mike is evaluating a specific used Hesston 3500 rotary cutter he found on Craigslist, not just describing the process abstractly. He crawls underneath to check blade spindle play, inspects and interprets gearbox oil condition, wiggles the tail wheel bearing, checks U-joints and the slip clutch, and scans the deck for welds as a negotiating point. Practical, brand-agnostic advice for anyone about to buy a used brush hog.
Tractor Mike is a longtime tractor-industry insider with decades of hands-on experience in the equipment business. He built his channel to help first-time and rural buyers make confident decisions, and his guidance comes from that deep, long-term background rather than a sales pitch.
Grab the blade and move it up and down; if it moves, the bearing could be failing. Also move it back and forth to check for play and feel for delay when switching the PTO from forward to reverse.
It means there is water or condensation in the oil. Mike says this is common and not necessarily a dealbreaker as long as the gearbox is holding oil and not leaking.
An oil leak or dead grass under where it was parked, or a gearbox that is bone dry or has a mixture of oil and sawdust, which means someone is selling you a problem.
With the machine off the ground, spin the tail wheel and wiggle it on the shaft; if there is play, the bearing inside is going out.