Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This video compares a swing-type stump grinder (the 3P24) against the channel's previously reviewed 1P24 model during a real multi-stump job with a tree-service friend. It covers PTO speed differences, hydraulic outlet requirements, weight and maneuverability tradeoffs, and grinding technique. Real-world messiness included, tight fences, fading daylight, fatigue. Best for compact tractor owners deciding between grinder styles or sizing up the 3P24 specifically.
The 1P24 spins at 540 RPM directly off the PTO shaft, while the 3P24 has a gearbox that increases the head speed, especially helpful at the right-angle turn.
This particular 3P24 model requires two hydraulic outlets, though an upgraded version only needs one with a built-in diverter for the two cylinders.
Yes, the video notes the 1P24 works better for navigating and moving around different stump pieces, while the swing mechanism on the 3P24 makes maneuvering harder in tight spots.
Set the three-point hitch part sitting on the ground first, then lower it back down after positioning so the tractor locks in place and won't roll.