Kubota B2601 hydraulic pressure test!!

This is a short, single-purpose clip: an owner running an actual hydraulic pressure test on a two-year-old Kubota B2601 using a Wicket gauge, checking readings at idle and PTO speed against the third-function relief valve spec. He confirms the tractor reads around 2000 PSI, within the 3000 PSI-rated gauge's range, and concludes no shimming is needed. Useful mainly for B2601 owners troubleshooting weak hydraulic/loader performance.

Posted by the Trevor K channel, an owner sharing a real diagnostic test on his own tractor rather than a dealer presentation.