Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →T-Bone walks through a DIY welding mod to make a $100 box blade compatible with a quick hitch, plasma-cutting and bending a lower pipe, grinding, MIG welding a patch plate, and adding a flat-bar brace for rigidity. It's a rough, real-world shop job with honest commentary about the imperfections. Best for budget-minded owners comfortable with fabrication who want to see if a similar hack could work for their setup.
Cut the lower pipe loose with a plasma cutter, grind it clean, heat and bend it down for hook clearance, then weld a patch plate over the hole.
The video states you need 5 inches below the pin in order for the hook to come through.
Weld a flat bar brace across the cut area, since otherwise only the metal's own strength keeps it from bending back and forth.