Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A focused two-minute walkthrough of the exact steps to detach a Bobcat backhoe from a compact tractor. It covers pin removal, using the stabilizers to create a tripod stance, relieving hydraulic pressure, and, most usefully, explains how to loop the red and yellow hoses on the tractor side so the three-point hitch keeps working. Best for owners doing this for the first time who just need the procedure.
Lower stabilizers to the ground, remove the two large pins, then lower stabilizers slightly to lift the backhoe into a tripod stance before disconnecting hydraulic lines and driving away.
On the tractor side, connect the red female hose to the yellow male hose to create a loop so hydraulic fluid flows and the three-point hitch raises and lowers correctly.
The blue hose on the tractor is not used, so cap it with a rubber dust cap.
Yes, turn off the tractor, relieve pressure in all hydraulic lines, lower the front bucket as if parking, and cycle the three-point hinge lever.