Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a hands-on DIY install video, not a review: the owner unboxes a Land Pride third-function/grapple kit for a Kubota (likely the 4701 model loader) and walks through mounting hoses, quick-connect fittings, the loader-stick switch, valve, and wiring to the battery, step by step. It ends with a brief first test picking up brush with a 60-inch Titan Force root grapple. Best for owners planning their own third-function/grapple installation.
Both red wires tie together and run to the positive battery post through a supplied fuse holder. One black wire ties to the white wire on the valve and the other black wire ties to the black wire.
No. The fittings have O-rings and the long hoses are flared, so no pipe dope or Teflon tape is needed.
A 60-inch Titan Force root grapple, chosen over a 72-inch option because the larger size weighs quite a bit more.
The kit includes different brackets for different models. For the 4701, a specific larger bracket is used, while smaller models use a smaller bracket.