Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A dealership staffer walks through the complete process of removing and reinstalling a 3-point backhoe on Branson and TYM 15- and 20-series tractors, including the 255. He identifies all five attachment points, explains the pin-and-hook system in detail, covers the three-point linkage swap required, and demonstrates solo operation using the backhoe's own controls. Most useful for owners who haven't yet attempted the swap and want to know what's involved.
There are really four main points, two hooks in the back and two pins in the front, plus the top link, so five total.
Yes, the video shows it can be done solo using the backhoe's own controls, though having a second person to drive can help a little.
You need a 17 millimeter socket to remove the two nuts holding the pins that the backhoe attaches to on each side.
Without the stabilizers the lift arms can swing out and hit the tires, tearing up the tractor, especially with implements like a rototiller.