Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This video zeroes in on a specific and commonly misunderstood spec: the difference between lift capacity measured "at the pin" versus 500mm forward of the pin, and why comparing those two figures across brands misleads buyers. Mike uses a real viewer question about a John Deere 4710 falling short of its rated capacity to walk through the math, then adds practical rules of thumb by frame size. Best for shoppers trying to decode loader specs before purchasing.
Tractor Mike is a longtime tractor-industry insider with decades of hands-on experience in the equipment business. He built his channel to help first-time and rural buyers make confident decisions, and his guidance comes from that deep, long-term background rather than a sales pitch.
The 2,300 pound spec is measured at the pin, but at 500mm forward of the pin lift capacity drops to 1,705 pounds, so getting close to 2,000 pounds on forks is doing well.
At the pin means measured right where the attachment connects to the loader, while 500mm (19.685 inches) forward of the pin gives a more realistic picture of real-world lift capacity.
No, frame size matters more than horsepower. Tractors of 35, 40, and 45 horsepower on the same frame usually have the same lift capacity because hydraulic pump size and flow matter most.
On paper the spec said it could, but in reality it struggled lifting reams of paper off a truck; a 50 horsepower or bigger frame size tractor was needed instead.