Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A short, real-time walkthrough of reinstalling a front loader on a T474 tractor after it had been removed. Tony covers pulling the tractor into the cradle, connecting the three hydraulic lines (color-coded red/green/yellow), inserting the locking pins, and a quick function check to confirm nothing was hooked up backwards. Runs about five minutes with no extra depth, useful for owners who've never done a loader removal/reinstall and want to see the sequence once before trying it themselves.
Drive the arms into the cradle, connect the red, green, then yellow hydraulic lines after relieving pressure, tilt the bucket down to seat it, insert the locking pins, then test the functions.
Red goes first since it is at the bottom, green is next, and yellow goes in last.
Crank the tractor, give it some throttle, and run it through its functions to make sure none of the lines were connected backwards.