Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →Neil at Messick's runs through ten practical tips drawn from daily commercial use of pallet forks on their own dealer lot. Covers what to avoid when buying (clamp-ons, non-cast tines, fixed frames), physical modifications like drilling tip holes and adding sleeves, capacity math for off-center single-fork loads, brick-guard safety, lubrication, and adjusting the loader's level indicator. Useful for anyone buying or already running pallet forks who wants actionable shop-floor guidance.
Avoid clamp-on forks, forks with box-welded (not cast) tine construction, and forks without an adjustable frame that pins into a backing plate.
If the full set is rated, say, 4500 pounds, lifting an off-center load on just one fork means that fork's real capacity is about 2250 pounds, half the total rating.
Holes let you drop a ball or pin through the tip to move trailers, implements, or round balers, as long as the hole stays only in the tip, not the fork's structure.
It's the back piece on the forks that keeps a load from spilling onto the operator when the loader rolls back, protecting against shifting loads.