Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →An official John Deere how-to walkthrough focused entirely on the step-by-step process of hooking up and removing global loader carrier attachments, demonstrated on a 5100R with a 540R loader. It covers unlocking the locking pin, lowering and backing away from an attachment, and picking up a new one, including a bale spear demo. Best for owners new to the global carrier system who want the correct procedure.
Level the attachment about six inches off the ground, put the transmission in park, shut off the engine, pull and rotate the locking pin handle down to open the latch, lower the attachment, lower the carrier until the bar clears the hooks, and back away.
Tilt the carrier downward as far as it will go, guide the carrier bar into the attachment's hooks, then lift and tilt the carrier back so the lower lock pins trigger the spring-loaded locking pin on both sides.
After hooking up the attachment, tilt it down all the way to make sure it is locked in place, since the lower lock pins trip the latch closing it.