Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This short field video shows the Land Pride RCR 1806 brush hog running on a Kubota L5740 while clearing land that hadn't been touched in 24 years. The creator briefly explains blade design versus finish mowers, demonstrates the cutter height adjustment, and spends the most time warning about gearbox corrosion from outdoor storage, a practical tip drawn from a firsthand equipment failure. Best for new brush-hog owners rather than L5740 shoppers.
There is a wheel on the back of the bush hog you adjust to set how high you want it, and it is not difficult to meter in.
It can corrode with water, turning the oil inside like a milkshake, seizing the blades and causing the belt to burn so fast it melted the metal and fried the mower.
The bush hog has one big circle with two blades on either side, while a finish mower has three blades, letting the bush hog chop through anything in its way.
For material one eighth of an inch to half an inch it works well, but anything larger calls for a flail mower instead.