Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →Structured around a viewer's real question about replacing a bent rotary cutter, this video teaches one core sizing method, measure the thickest material you'll cut, then match that to a manufacturer's series rating, and walks through several purchase decisions: rock protection types, shear bolt vs. slip clutch driveline protection, single vs. dual gearbox, and deck design. Mike also explains why gearbox horsepower ratings and warranties are largely irrelevant. Best for first-time buyers comparing models.
Tractor Mike is a longtime tractor-industry insider with decades of hands-on experience in the equipment business. He built his channel to help first-time and rural buyers make confident decisions, and his guidance comes from that deep, long-term background rather than a sales pitch.
Take a tape measure to the biggest sprout or material you'll be cutting. That measurement tells you which series cutter to get, since manufacturers rate cutters by maximum material size, from one inch up to five inches.
A shear bolt is a weak-link bolt that breaks when you hit something immovable, so everything spins freely. A slip clutch uses discs that must be burnished once a year or adjusted, or it won't protect the drive line properly.
Not much. Gearboxes usually fail from lost lubrication, overfilling, or hitting something immovable, none of which warranty covers. A high horsepower rating or long warranty does no good against those failure causes.
Options are no protection, a rubber flap, or chains. Mowing high (four to five inches) needs no protection, but mowing lower requires flaps or chains to slow rocks; chains cost more but allow better airflow.