Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a hands-on restoration log on a neglected late-1970s White 260 (Fiat-built) tractor, not a spec review. It covers draining water-contaminated hydraulic fluid, cleaning a reusable filter, an engine oil change with Rotella, mounting a salvaged loader and bucket, fixing reversed hydraulic lines and a cylinder leak, and fabricating a stiffened cutting edge before the first test load. Best for owners tackling their own DIY loader install or fluid revival on an old machine.
The video drains the white, water-contaminated fluid, cleans the reusable stainless steel filter ultrasonically, refills with universal tractor hydraulic fluid, and plans to run it about ten hours before flushing again.
On this White 260, after hooking everything up the hydraulic lines were exactly reversed, so raising the arms made them go down and tipping the bucket worked backwards, requiring the lines to be switched.
A half inch piece of solid plow metal was clamped and shaped with a hammer, railroad tie, and propane torch, drilled, and bolted under the bucket edge to stiffen it before first use.
Rotella engine oil, not synthetic, bought on sale at Princess Auto, was used since the tractor is old and the crank took exactly two jugs.