Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a narrow how-to, not a tractor review: it shows how to remove the side engine panel on a 1025R or 1023E after a Curtis cab has been installed, since the cab changes the normal removal steps. It's a short demonstration covering unbolting the front, sliding the panel to disengage the rear, and reversing the process for reinstallation. Useful specifically for cab-equipped owners needing engine panel access for maintenance.
Posted by Curtis Industries LLC, a cab manufacturer, so the video is a practical support demo tied to their own product rather than an independent review.
| John Deere 1025R | John Deere 1023E | |
|---|---|---|
| PTO horsepower | 18 hp | 16 hp |
| Loader lift capacity | Not Published | 120R: 1,823 lbf (at pivot point) |
| 3-point lift capacity | 1,177 lb | 1,177 lb |
| Hydraulic flow | 3.5 gpm | 3.5 gpm |
