Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →Pete walks through a complete hydraulic cylinder rebuild on a Kubota B21 unit, covering leak diagnosis (wear, rod scratches, bent rod), disassembly with common tools like a pipe wrench, bore inspection, and step-by-step seal replacement with clear guidance on seal orientation. It's a practical, hands-on how-to that goes deeper than most walkarounds; owners comfortable with basic mechanical work will get the most from it.
Check for general wear, look for scratches or marks on the rod from dropped objects, and check if the rod is bent, which wears the seal prematurely.
Yes, a pipe wrench works, though it leaves slight marks on the cap. You can still make a good repair even without the proper tool.
The lip must face toward the oil so pressure pushes it against the rod; installed backwards, the seal opens up and shoots oil out.
Put a straight edge against the rod in multiple locations while turning it to check straightness before reassembly.