Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a real-world install of an aftermarket hydraulic top link on a compact tractor, not a product ad. The owner shares actual cost ($190 cylinder, ~$200 hoses), walks through ordering and fitting mistakes, and explains a key gotcha: cylinder orientation and hose length must account for full extension or it can bind against the frame. Ends with a driveway test leveling a box blade. Useful for owners planning the same upgrade.
Posted by the Rock Hill Farm channel, an owner-operator sharing hands-on impressions and mistakes from installing equipment on his own tractor.
The cylinder cost about $190, and hoses made by the dealership with right angle fittings cost around $200, not including the cylinder itself.
If the fixed end of the cylinder is mounted at the back pin, lowering the three-point can cause the cylinder frame to hit the tractor frame and stop it from dropping.
Yes, if the fixed end is mounted on the three-point, the hoses travel in and out with the cylinder, so they must be long enough for full extension.
Yes, the cylinder does not include hoses or fittings, and the factory top link rod ends may need bushings added to prevent side to side movement.
