Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A practical, safety-first walkthrough of physically assembling and mounting a John Deere iMatch quick-hitch to a tractor's three-point hitch, solo, without a helper. Avery identifies each component by name, explains orientation (tapered vs. wide side), and walks through the connection sequence: center link, draft links, then lift links. Brief but genuinely hands-on. Best for first-time iMatch owners who need a clear step-by-step to get it attached correctly.
Turn the motor off, put it in neutral, and set the parking brake. Then connect the center link first, followed by the draft links to the frame pins, and finally the lift links, going pin to pin from the inside out.
Install it so the wide side is out and the tapered part of the draft links faces in.
The center link gives control over bringing the iMatch forward or backward, while side to side movement is controlled with the lift link adjuster.