Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →Focuses specifically on installing John Deere's front angling cylinder kit (part BLV10880) on a 1025R quick hitch, notably without removing the hitch from the tractor, contrary to Deere's recommendation. The presenter walks through all kit components, explains fitting orientation, pin placement, cotter pins, and hose hookup including how to correct reversed angling direction. Best for owners who already have a fixed quick hitch and want to add angling capability themselves.
Yes. John Deere recommends removing the front hitch, but the presenter leaves it on the tractor and installs the kit that way instead.
A hydraulic cylinder, two hydraulic hoses with color coded fittings, pins and bolts, hydraulic couplers, and an additional hanger. No instructions were included.
If pushing the valve left or right gives the opposite result, swap the hydraulic hoses to the other side to correct the direction.
The fixed, or head, end has no seals. The other end has the rod that moves in and out, which is the rod end.
| John Deere 1025R | John Deere 1023E | |
|---|---|---|
| PTO horsepower | 18 hp | 16 hp |
| Loader lift capacity | Not Published | 120R: 1,823 lbf (at pivot point) |
| 3-point lift capacity | 1,177 lb | 1,177 lb |
| Hydraulic flow | 3.5 gpm | 3.5 gpm |