Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This isn't a tractor review but a skills tutorial on running a box blade well. Dave explains finding 'neutral' (both blades touching ground evenly), measuring and marking that reference point on the top link and lift arms, then using cut-and-fill technique to move dirt without the loader. He also compares a hydraulic top link versus a screw-type top link for controlling blade pitch. Best for owners wanting practical, hands-on grading technique rather than tractor shopping info.
Posted by the daveknowshow channel, an owner-operator teaching hands-on tractor and implement skills from personal experience.
It means both the front blade and the back blade are touching the ground equally, with neither cutting more aggressively than the other.
Measure with a tape measure from where the screw threads into the housing to the end of the thread, and note that measurement at neutral position to compare against adjustments.
Dave says the hydraulic top link makes box blading great and he loves it, though he notes you can still get good results with a screw-type top link.
Cut the high spot by lowering the box blade to about two and a half on the three point control, fill the box, then travel to the hole and release dirt to fill it.