Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This isn't a stock-tractor review; it's an owner's detailed walkaround of his personally turbocharged Kubota B7100, running on recycled waste oil. He explains the DIY build: eBay TD03 turbo sizing, welded V-band manifold flange, motorcycle air filter, 5 PSI wastegate, fuel pump adjustment screw, pyrometer readings under load, and boost behavior while mowing. It's build-log depth, not a buying guide, best suited to DIYers interested in diesel turbo mods rather than stock purchase decisions.
Posted by an owner-operator (Dobby's Hobbies) documenting his own home-built turbo mod, so expect hands-on DIY detail rather than a neutral or dealer-style review.
A random eBay turbo advertised as a TD03 for a Kubota engine, paired with a welded T25 to 2.5-inch V-band adapter onto the manifold.
He has a 5 PSI wastegate and has rarely seen it actuate, estimating boost usually stays around 3 to 4 pounds except when mowing under heavy load.
Unscrew the small cap to find a flathead screw adjustment; turning it in adds fuel, turning it out leans it. He ran his about a half to three quarter turn.
He has never seen the pyrometer, measured on the back of the turbo, exceed about 600 degrees under full load, estimating actual EGTs near 1000 degrees.