Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a DIY fabrication video, not a tractor review: the creator shows a homemade receiver-hitch frame he built to hook over his loader bucket without bolting into it, avoiding bucket damage from tongue weight. He walks through the angle-iron construction, how it chains and clamps onto the bucket, and why he made it this way instead of a bolt-on kit. Useful for owners wanting a buildable alternative to a bucket-mounted hitch receiver.
Posted by the daveknowshow channel, an owner sharing a personal shop-built fix rather than a professional or dealer perspective.
The creator worried that tongue weight and bumps could bend or sag a bucket bolted in one spot, ruining the bucket.
It hinges down over the bucket, hooks on with a chain cut to fit, and clamps down, resting on angle iron pieces welded across the frame.
Angle iron, believed to be two and a half or three inch, quarter inch thick, welded into a frame that goes over the bucket.
When the backhoe is already mounted on the back of the tractor and a trailer needs to be moved, avoiding removing the backhoe.