Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a hands-on, step-by-step walkthrough of removing and reinstalling a mid-mount mower deck on a Kubota, not a review or buying guide. It covers lowering the deck, disconnecting the PTO shaft and side mounts, pulling the deck out, clearing out accumulated grass, hitting the four grease points, and reinstalling everything. Useful for owners doing their own deck maintenance who want to see the actual mechanical sequence.
Appears to be an owner or operator filming their own maintenance work, not a dealer or manufacturer channel.
Lower the deck, pull the pin on the left side to drop it, pull the pin on the right side the same way, then disconnect the PTO shaft by moving the deck forward so it comes apart and can be pulled out.
There are four grease points: one on each side of the deck, one on the shaft, and one more spot that is easy to miss, so check carefully before reinstalling.
Remove the covers, which are held on by two 12 millimeter bolts, pull off the grass by hand, then blow out the remaining debris with compressed air before greasing.
Slide the deck underneath, line up the PTO shaft using its groove, fit the side mounts by pulling and twisting them into their grooves, then lift the lever to raise the deck and close the pin.
