Bobcat CT4045 vs Bobcat CT4050

Across 8 measurable specs, the Bobcat CT4050 leads 2 categories to 0 (6 tied). Machine pages: Bobcat CT4045 and Bobcat CT4050.

Want a third or fourth machine in the mix? Open this matchup in the comparison tool and add up to two more.

Category Verdict

Full Spec Sheet

Every published spec, side by side, including the details the graphs above don't chart.

Spec	BobcatCT4045	BobcatCT4050

▶Engine
PTO Power	32.8 hp	39.3 hp
Alternator	alternator	alternator
Air Cleaner	Not Published	Dry type, replaceable
Engine Type	Diesel	diesel
Fuel System	Common rail direct injection	Common Rail Direct Injection (CRDI)
Displacement	111.4 in³	111.4 in³
Engine Model	Daedong 3F183T	3FT-THL4-U
No. of Cylinders	3	3
Rated Engine Speed	2600 rpm	2600 rpm
Cooling System Type	Not Published	water cooled
Engine Manufacturer	Daedong	Daedong
Engine Power (Gross)	44.9 hp	50.3 hp
Engine Emissions Constraints	Tier 4	Tier 4
▶Weight
Weight with ROPS and Loader	Not Published	Not Published
Weight with Cab and Loader	Not Applicable	Not Applicable
▶Warranty
Warranty Length & Coverage	24 months / 1,500 hours (whichever occurs first)	24 months / 1,500 hours (whichever occurs first)
▶Hydraulics
Pump Type	Open Center, Gear	36.40
Steering Flow	4.94 gpm 18.7 lpm	4.94 gpm 18.7 lpm
Implement Flow	9.6 gal/min (36.5 Lpm)	9.62 gpm 36.4 lpm
Total Hydraulic Flow	16.5 gpm	16.5 gpm [HST] / 16.5 gpm [SST]
Hydraulic System Type	open center	open center
Rear Remote Hydraulic Flow	NOT FOUND	36.40
Overall Hydraulic Pump Flow	16.5 gpm	16.5 gpm [HST] / 16.5 gpm [SST]
No. of Optional Remote Valves	NOT FOUND	2nd Pair Opt [HST] / 2 Pairs Opt [SST]
No. of Standard Remote Valves	1 Pair Std (2nd Pair Opt)	1 Pair Std (2nd Pair Opt) [HST] / Opt 2 Pairs [SST]
▶PTO & Hitch
PTO Rear	540 rpm	540 rpm
PTO Type	Independent	Independent
Lift Control Type	Hydraulic Position Control System	Hydraulic Position Control System
Hitch Lift Capacity	2716 lb.	2716 lb.
Mid-PTO Availability	Optional: 2119 rpm	Optional: 2119 rpm [HST] / - [SST]
Category, 3-Point Hitch	Category 1	Category 1
Hitch Lift Capacity (at 24”)	2,716 lb	2,716 lb
▶Tire Options
R3 Turf - Rear	44X18-20	44x18.0-20 R3
R3 Turf - Front	29X12.5-15	29x12.5-15NHS R3
Tire Size & Options	Turf Tires, Industrial Tires, Agricultural Tires	Not Published
R4 Industrial - Rear	NOT FOUND	4.6 gal-24 R4
R4 Industrial - Front	NOT FOUND	10-16.5 (124 A2)
R1 Agricultural - Rear	13.6-24	13.6-24
R1 Agricultural - Front	8-16	8-16
▶Fluid Capacity
Coolant Capacity	6.7 (6.3) qts (L)	0.9 gal
Crankcase Capacity	6.4 (6.0) qts (L)	2 gal
Fuel Tank Capacity	12.7 gal.	11.9 gal
Front Axle Fluid Capacity	Not Published	1.5 gal
Transmission / Hydraulic System Capacity	Not Published	11.4 gal
▶Loader & Attachments
Loader Model	FL9	FL9
Loader Lift Height	104.6 in.	104.6 in.
Loader Breakout Force	4136 lb.	4136 lb.
Quick Attach Loader System	Standard Quick Attach Mounting System	Standard Quick Attach Mounting System
Loader Lift Capacity (Full Height)	1795 lb.	1795 lb.
▶Transmission & Drivetrain
Clutch	NOT FOUND — no source explicitly states clutch type (e.g., dry single-disc). SST requires clutch to shift gears; HST has no clutch pedal.	Standard
No. of Speeds	8F X 8R Synchro	8F X 8R [SST]
Transmission Type	3-Range HST	3-Range HST [HST] / 8F X 8R Synchro [SST]
Max Travel Speed (Forward)	18.5 mph (29.7 km/hr.)	18.5 mph (29.7 km/hr.) [HST] / 17.5 mph (28.2 km/hr.) [SST]
Max Travel Speed (Reverse)	12.9 mph (20.8 km/hr.)	12.9 mph (20.8 km/hr.) [HST] / 17.1 mph (27.5 km/hr.) [SST]
Differential Lock & Limited Slip Options	Std	Std
▶Chassis, Steering & Controls
Brakes	Wet Multi-disc	Wet Multi-disc
Steering	Hydrostatic Power Steering	Hydrostatic Power Steering
Frame Type	4x4 MFWD 4WD	Not Published
Front Axle Type	NOT FOUND — no source explicitly labels a 'Front Axle Type' value for the CT4045	Hydraulic multi disc Clutch
Drawbar Capacity	NOT FOUND — no credible source reviewed lists an explicit drawbar capacity value for the CT4045	750.00 KG
Front Axle Rating	NOT FOUND — no source reviewed lists an explicit front axle rating (lb or kg) for the CT4045	Not Published
Seat Suspension & Adjustability	Suspension seat (standard); deluxe suspension seat available on select models - fully adjustable, foldable right-hand armrest	Std
▶Dimensions & Maneuverability
Wheelbase	71.2 in.	71.2 in.
Overall Width	67.0 in.	Ag Tires: 67.0 in. / Industrial Tires: 69.8 in. / Turf Tires: 72.2 in.
Ground Clearance	15.3 in.	15.3 in.
Height to Top of ROPS	97.4 in.	97.4 in.
Height to Top of Cab Model	NOT FOUND — no cab model variant of the CT4045 was found in any source reviewed; all sources describe an open ROPS station	Not Applicable
Height to Top of ROPS (folded)	NOT FOUND — no source reviewed explicitly lists a folded ROPS height for the CT4045	Not Published
Min. Turn Radius without Brakes	103.5 in.	103.5 in.
Overall Length with 3-Point Hitch	125.5 in.	125.5 in.
▶ITC Company Accessories
Accessories that fit	Brush Guard Side Guards $200.00 Bolt onto the side of the OEM guard and offers wrap around protection	Brush Guard Side Guards $200.00 Bolt onto the side of the OEM guard and offers wrap around protection

Bobcat CT4045 vs Bobcat CT4050: Quick Answers

Which has more horsepower, the Bobcat CT4045 or the Bobcat CT4050?

The Bobcat CT4050 leads on engine hp at 50.3 hp hp, compared to 44.9 hp hp for the Bobcat CT4045.

Which has more PTO horsepower, the Bobcat CT4045 or the Bobcat CT4050?

The Bobcat CT4050 leads on pto hp at 39.3 hp hp, compared to 32.8 hp hp for the Bobcat CT4045.

Which has more loader lift capacity, the Bobcat CT4045 or the Bobcat CT4050?

They are effectively tied: both machines are rated at 1,795 lb lb for loader lift.

Which has more three-point hitch lift capacity, the Bobcat CT4045 or the Bobcat CT4050?

They are effectively tied: both machines are rated at 2,716 lb lb for 3-pt lift (24 in).

More Head-to-Heads