Case IH Farmall 40C Gear vs LS Tractor MT340HC

Every published spec for both machines, side by side. The verdict below is computed straight from the spec sheets, not opinion.

Across 8 measurable specs, this matchup is a dead heat: 3 categories to the Case IH Farmall 40C Gear, 3 to the LS Tractor MT340HC, 2 tied. Machine pages: Case IH Farmall 40C Gear and LS Tractor MT340HC.

Want a third or fourth machine in the mix? Open this matchup in the comparison tool and add up to two more.

Category Verdict

Spec	Case IH Farmall 40C Gear	LS Tractor MT340HC
Engine HP (hp)	40 hp	40 hp
PTO HP (hp)	▲ 34 hp	32 hp
Weight (lb)	▲ 3,803 lb	3,661 lb
Loader Lift (lb)	2,000 lb	▲ 2,185 lb
3-Pt Lift (24 in) (lb)	1,433 lb	1,433 lb
Lift Height (in)	▲ 105 in	94.4 in
Breakout Force (lbf)	2,640 lbf	▲ 3,612 lbf
Hydraulic Flow (gpm)	8.2 gpm	▲ 13.7 gpm
Travel Speed (mph)	14.2 mph	n/a

The headline numbers at a glance.

Case IH Farmall 40C GearLS Tractor MT340HC

Engine HPhp

▲40 hp

PTO HPhp

▲34 hp

32 hp

Weightlb

▲3,803 lb

3,661 lb

Loader Liftlb

2,000 lb

▲2,185 lb

3-Pt Lift (24 in)lb

▲1,433 lb

Share↓ Image 𝕏 f ✉

Full Spec Sheet

Every published spec, side by side, including the details the graphs above don't chart.

Spec	Case IHFarmall 40C Gear	LS TractorMT340HC


Engine Manufacturer	Not Published	LS Mtron
Engine Model	Not Published	L3C19-T
Engine Type	Diesel, 3-cylinder, turbocharged	Vertical, water-cooled, 4 cycle diesel
No. of Cylinders	3	3
Displacement	116 in³	114.7 in³
Rated Engine Speed	2600 rpm	2600 rpm
Engine Power (Gross)	40 hp	40 hp
PTO Power	34 hp	32 hp
Engine Emissions Constraints	Tier 4	Tier 4
Cooling System Type	Not Published	Water-cooled
Air Cleaner	Replaceable dry element	Dry
Fuel System	Common rail direct injection	Delphi, CRDI
Alternator	70 A	70 A, 12 V

Pump Type	Not Published	Gear pump, engine drive
Implement Flow	8.2 gpm	8.2 gpm
Steering Flow	4.2 gpm	5.5 gpm
Total Hydraulic Flow	Not Published	13.7 gpm
Overall Hydraulic Pump Flow	Not Published	13.7 gpm
Hydraulic System Type	Open center	Open center
Rear Remote Hydraulic Flow	Not Published	Not Published
No. of Standard Remote Valves	2	2 Pair
No. of Optional Remote Valves	Not Published	Not Published

Fuel Tank Capacity	12.4 gal	12.4 gal
Coolant Capacity	Not Published	1.9 gal
Crankcase Capacity	Not Published	1.5 gal
Transmission / Hydraulic System Capacity	Not Published	7.9 gal
Front Axle Fluid Capacity	Not Published	1.7 gal

PTO Type	Independent rear PTO, electro-hydraulic engagement	Independent
PTO Rear	540 rpm	540 rpm
Mid-PTO Availability	Optional, 2000 rpm	Optional (2,000 rpm)
Category, 3-Point Hitch	Category 1	Category I
Hitch Lift Capacity	1,808 lb	1,808 lb
Hitch Lift Capacity (at 24”)	1,433 lb	1,433 lb
Lift Control Type	Mechanical draft control (MDC)	Position & Draft

Transmission Type	12 x 12 mechanical shuttle with synchro shift	Hydrostatic (HST)
No. of Speeds	12 forward, 12 reverse	Infinite, 3 ranges (HST)
Max Travel Speed (Forward)	14.2 mph	Not Published
Max Travel Speed (Reverse)	Not Published	Not Published
Clutch	dry clutch	Not Published
Differential Lock & Limited Slip Options	Mechanical rear differential lock	Mechanical differential lock (pedal)

Frame Type	Not Published	Not Published
Steering	Power steering	Hydrostatic Power Steering
Brakes	Wet multi-disc	Wet, Multi-disc
Seat Suspension & Adjustability	Deluxe cloth seat with adjustable suspension	Not Published
Front Axle Type	Mechanical Front Drive (MFD)	Not Published
Front Axle Rating	Not Published	Not Published
Drawbar Capacity	Not Published	Not Published

Overall Length with 3-Point Hitch	128.1 in	128.3 in
Overall Width	66.4 in	59.3 in
Wheelbase	66 in	69 in
Ground Clearance	Not Published	Not Published
Min. Turn Radius without Brakes	Not Published	Not Published
Height to Top of ROPS	Not Published	Not Published
Height to Top of ROPS (folded)	Not Published	Not Published
Height to Top of Cab Model	93.3 in	86.6 in

Tractor Weight (Base)	3,803 lb	3,661 lb
Weight with ROPS and Loader	Not Published	Not Published
Weight with Cab and Loader	Not Published	Not Published

Tire Size & Options	R1 Agricultural; R3 Turf; R4 Industrial	R1 Agricultural, R3 Turf, R4 Industrial
R1 Agricultural - Front	Not Published	7-14
R1 Agricultural - Rear	Not Published	11.2-24
R3 Turf - Front	Not Published	25x8.5-14
R3 Turf - Rear	Not Published	41x14-20
R4 Industrial - Front	Not Published	25x8.5-14
R4 Industrial - Rear	Not Published	43x16-20

Quick Attach Loader System	Quick-Attach faceplate; quick-connect loader mounting (L350A)	LL3116: Standard Skid Steer Coupler (skid-steer compatible quick-attach)
Loader Model	L350A	LL3116
Loader Lift Height	105 in	94.4 in
Loader Lift Capacity (Full Height)	2,000 lb	LL3116: 2,185 lb
Loader Breakout Force	2,640 lbf	3,612 lb

Warranty Length & Coverage	6-year (72-month) extended warranty: 2-year bumper-to-bumper plus 4 additional years powertrain	6-year limited powertrain warranty

Find a Case IH dealer near you Find a LS Tractor dealer near you

Case IH Farmall 40C Gear vs LS Tractor MT340HC: Quick Answers

Which has more horsepower, the Case IH Farmall 40C Gear or the LS Tractor MT340HC?: They are effectively tied: both machines are rated at 40 hp hp for engine hp.
Which has more PTO horsepower, the Case IH Farmall 40C Gear or the LS Tractor MT340HC?: The Case IH Farmall 40C Gear leads on pto hp at 34 hp hp, compared to 32 hp hp for the LS Tractor MT340HC.
Which is heavier, the Case IH Farmall 40C Gear or the LS Tractor MT340HC?: The Case IH Farmall 40C Gear leads on weight at 3,803 lb lb, compared to 3,661 lb lb for the LS Tractor MT340HC.
Which has more loader lift capacity, the Case IH Farmall 40C Gear or the LS Tractor MT340HC?: The LS Tractor MT340HC leads on loader lift at 2,185 lb lb, compared to 2,000 lb lb for the Case IH Farmall 40C Gear.
Which has more three-point hitch lift capacity, the Case IH Farmall 40C Gear or the LS Tractor MT340HC?: They are effectively tied: both machines are rated at 1,433 lb lb for 3-pt lift (24 in).

More Head-to-Heads

Category Verdict

Spec	Case IH Farmall 40C Gear	LS Tractor MT340HC
Engine HP (hp)	40 hp	40 hp
PTO HP (hp)	▲ 34 hp	32 hp
Weight (lb)	▲ 3,803 lb	3,661 lb
Loader Lift (lb)	2,000 lb	▲ 2,185 lb
3-Pt Lift (24 in) (lb)	1,433 lb	1,433 lb
Lift Height (in)	▲ 105 in	94.4 in
Breakout Force (lbf)	2,640 lbf	▲ 3,612 lbf
Hydraulic Flow (gpm)	8.2 gpm	▲ 13.7 gpm
Travel Speed (mph)	14.2 mph	n/a

The headline numbers at a glance.

Case IH Farmall 40C GearLS Tractor MT340HC

Engine HPhp

▲40 hp

PTO HPhp

▲34 hp

32 hp

Weightlb

▲3,803 lb

3,661 lb

Loader Liftlb

2,000 lb

▲2,185 lb

3-Pt Lift (24 in)lb

▲1,433 lb

Share↓ Image 𝕏 f ✉

Full Spec Sheet

Every published spec, side by side, including the details the graphs above don't chart.

Spec	Case IHFarmall 40C Gear	LS TractorMT340HC


Engine Manufacturer	Not Published	LS Mtron
Engine Model	Not Published	L3C19-T
Engine Type	Diesel, 3-cylinder, turbocharged	Vertical, water-cooled, 4 cycle diesel
No. of Cylinders	3	3
Displacement	116 in³	114.7 in³
Rated Engine Speed	2600 rpm	2600 rpm
Engine Power (Gross)	40 hp	40 hp
PTO Power	34 hp	32 hp
Engine Emissions Constraints	Tier 4	Tier 4
Cooling System Type	Not Published	Water-cooled
Air Cleaner	Replaceable dry element	Dry
Fuel System	Common rail direct injection	Delphi, CRDI
Alternator	70 A	70 A, 12 V

Pump Type	Not Published	Gear pump, engine drive
Implement Flow	8.2 gpm	8.2 gpm
Steering Flow	4.2 gpm	5.5 gpm
Total Hydraulic Flow	Not Published	13.7 gpm
Overall Hydraulic Pump Flow	Not Published	13.7 gpm
Hydraulic System Type	Open center	Open center
Rear Remote Hydraulic Flow	Not Published	Not Published
No. of Standard Remote Valves	2	2 Pair
No. of Optional Remote Valves	Not Published	Not Published

Fuel Tank Capacity	12.4 gal	12.4 gal
Coolant Capacity	Not Published	1.9 gal
Crankcase Capacity	Not Published	1.5 gal
Transmission / Hydraulic System Capacity	Not Published	7.9 gal
Front Axle Fluid Capacity	Not Published	1.7 gal

PTO Type	Independent rear PTO, electro-hydraulic engagement	Independent
PTO Rear	540 rpm	540 rpm
Mid-PTO Availability	Optional, 2000 rpm	Optional (2,000 rpm)
Category, 3-Point Hitch	Category 1	Category I
Hitch Lift Capacity	1,808 lb	1,808 lb
Hitch Lift Capacity (at 24”)	1,433 lb	1,433 lb
Lift Control Type	Mechanical draft control (MDC)	Position & Draft

Transmission Type	12 x 12 mechanical shuttle with synchro shift	Hydrostatic (HST)
No. of Speeds	12 forward, 12 reverse	Infinite, 3 ranges (HST)
Max Travel Speed (Forward)	14.2 mph	Not Published
Max Travel Speed (Reverse)	Not Published	Not Published
Clutch	dry clutch	Not Published
Differential Lock & Limited Slip Options	Mechanical rear differential lock	Mechanical differential lock (pedal)

Frame Type	Not Published	Not Published
Steering	Power steering	Hydrostatic Power Steering
Brakes	Wet multi-disc	Wet, Multi-disc
Seat Suspension & Adjustability	Deluxe cloth seat with adjustable suspension	Not Published
Front Axle Type	Mechanical Front Drive (MFD)	Not Published
Front Axle Rating	Not Published	Not Published
Drawbar Capacity	Not Published	Not Published

Overall Length with 3-Point Hitch	128.1 in	128.3 in
Overall Width	66.4 in	59.3 in
Wheelbase	66 in	69 in
Ground Clearance	Not Published	Not Published
Min. Turn Radius without Brakes	Not Published	Not Published
Height to Top of ROPS	Not Published	Not Published
Height to Top of ROPS (folded)	Not Published	Not Published
Height to Top of Cab Model	93.3 in	86.6 in

Tractor Weight (Base)	3,803 lb	3,661 lb
Weight with ROPS and Loader	Not Published	Not Published
Weight with Cab and Loader	Not Published	Not Published

Tire Size & Options	R1 Agricultural; R3 Turf; R4 Industrial	R1 Agricultural, R3 Turf, R4 Industrial
R1 Agricultural - Front	Not Published	7-14
R1 Agricultural - Rear	Not Published	11.2-24
R3 Turf - Front	Not Published	25x8.5-14
R3 Turf - Rear	Not Published	41x14-20
R4 Industrial - Front	Not Published	25x8.5-14
R4 Industrial - Rear	Not Published	43x16-20

Quick Attach Loader System	Quick-Attach faceplate; quick-connect loader mounting (L350A)	LL3116: Standard Skid Steer Coupler (skid-steer compatible quick-attach)
Loader Model	L350A	LL3116
Loader Lift Height	105 in	94.4 in
Loader Lift Capacity (Full Height)	2,000 lb	LL3116: 2,185 lb
Loader Breakout Force	2,640 lbf	3,612 lb

Warranty Length & Coverage	6-year (72-month) extended warranty: 2-year bumper-to-bumper plus 4 additional years powertrain	6-year limited powertrain warranty

Find a Case IH dealer near you Find a LS Tractor dealer near you

Case IH Farmall 40C Gear vs LS Tractor MT340HC: Quick Answers

Which has more horsepower, the Case IH Farmall 40C Gear or the LS Tractor MT340HC?

They are effectively tied: both machines are rated at 40 hp hp for engine hp.

Which has more PTO horsepower, the Case IH Farmall 40C Gear or the LS Tractor MT340HC?

The Case IH Farmall 40C Gear leads on pto hp at 34 hp hp, compared to 32 hp hp for the LS Tractor MT340HC.

Which is heavier, the Case IH Farmall 40C Gear or the LS Tractor MT340HC?

The Case IH Farmall 40C Gear leads on weight at 3,803 lb lb, compared to 3,661 lb lb for the LS Tractor MT340HC.

Which has more loader lift capacity, the Case IH Farmall 40C Gear or the LS Tractor MT340HC?

The LS Tractor MT340HC leads on loader lift at 2,185 lb lb, compared to 2,000 lb lb for the Case IH Farmall 40C Gear.

Which has more three-point hitch lift capacity, the Case IH Farmall 40C Gear or the LS Tractor MT340HC?

They are effectively tied: both machines are rated at 1,433 lb lb for 3-pt lift (24 in).

Case IH Farmall 40C Gear vs LS Tractor MT340HC

Category Verdict

Full Spec Sheet

Case IH Farmall 40C Gear vs LS Tractor MT340HC: Quick Answers

More Head-to-Heads

More in the resource center

Look up a tractor

Side-by-side comparison

The Netflix of tractor videos

Tractor guides and articles

Case IH Farmall 40C Gear vs LS Tractor MT340HC

Category Verdict

Full Spec Sheet

Case IH Farmall 40C Gear vs LS Tractor MT340HC: Quick Answers

More Head-to-Heads