Massey Ferguson 2850M vs TYM T474

Across 8 measurable specs, the Massey Ferguson 2850M leads 8 categories to 0. Machine pages: Massey Ferguson 2850M and TYM T474.

Want a third or fourth machine in the mix? Open this matchup in the comparison tool and add up to two more.

Category Verdict

Full Spec Sheet

Every published spec, side by side, including the details the graphs above don't chart.

Spec	Massey Ferguson2850M	TYMT474

▶Engine
Engine Manufacturer	Iseki	TYM
Engine Model	Iseki E4FH	n/a
Engine Type	4-cylinder, turbocharged, liquid-cooled diesel	4-cylinder, naturally aspirated diesel
No. of Cylinders	4	4
Displacement	148.6 in³	139.5 in³
Rated Engine Speed	2600 rpm	2600 rpm
Engine Power (Gross)	48.8 hp	48.3 hp
PTO Power	Mech: 38.1 hp; HST: 36.2 hp	35.9 hp
Engine Emissions Constraints	Tier 4	Stage V
Cooling System Type	Liquid cooled	Not Published
Air Cleaner	Dry	Single dry
Fuel System	Common rail direct injection	IDI
Alternator	Not Published	70 A, 12 V
▶Hydraulics
Pump Type	Two gear-type pumps for steering and 3-point/remotes	Dual gear pump
Implement Flow	12.6 gpm	7.7 gpm
Steering Flow	7 gpm	4.2 gpm
Total Hydraulic Flow	19.6 gpm (12.6 + 7, computed)	11.9 gpm
Overall Hydraulic Pump Flow	19.6 gpm (12.6 + 7, computed)	11.9 gpm
Hydraulic System Type	Open center	Open center
Rear Remote Hydraulic Flow	Not Published	Not Published
No. of Standard Remote Valves	Not Published	1
No. of Optional Remote Valves	Not Published	Not Published
▶Fluid Capacity
Fuel Tank Capacity	14.0 gal	9.0 gal
Coolant Capacity	7.61 qt	6.9 qt
Crankcase Capacity	7.82 qt	6.8 qt
Transmission / Hydraulic System Capacity	Power Shuttle: 10.04 gal; Hydrostatic: 9.25 gal	8.5 gal
Front Axle Fluid Capacity	9 qt	8.7 qt
▶PTO & Hitch
PTO Type	Independent with SoftStart electronic modulation	Independent
PTO Rear	540 rpm (1-3/8 in)	540 rpm
Mid-PTO Availability	Optional, 2,000 rpm	Available (Mid-PTO kit)
Category, 3-Point Hitch	Category I and II	Category I
Hitch Lift Capacity	3,483 lb	2,689.6 lb
Hitch Lift Capacity (at 24”)	3,086 lb	1,764 lb
Lift Control Type	Position control with optional draft control	Position control
▶Transmission & Drivetrain
Transmission Type	12x12 power shuttle or 3-range hydrostatic	Mechanical
No. of Speeds	Power Shuttle: 12 forward and 12 reverse; HST: infinite forward and reverse (3-range)	F12 x R12
Max Travel Speed (Forward)	Not Published	14.9 mph
Max Travel Speed (Reverse)	Not Published	Not Published
Clutch	Not Published	Dry single plate
Differential Lock & Limited Slip Options	Not Published	Not Published
▶Chassis, Steering & Controls
Frame Type	Not Published	Not Published
Steering	Power steering	Hydrostatic
Brakes	Wet disc	Wet disc
Seat Suspension & Adjustability	Open station: vinyl-clad seat; standard cab: spring-suspension seat with armrests; deluxe cab: air-ride seat with armrests	Not Published
Front Axle Type	Solid cast front axle	Not Published
Front Axle Rating	Not Published	Not Published
Drawbar Capacity	Not Published	Not Published
▶Dimensions & Maneuverability
Overall Length with 3-Point Hitch	132.3 in	131 in
Overall Width	70.1 in	54.5 in
Wheelbase	Not Published	69.7 in
Ground Clearance	14.0 in	12.8 in
Min. Turn Radius without Brakes	Not Published	117.5 in
Height to Top of ROPS	102.4 in	94.5 in
Height to Top of ROPS (folded)	Not Published	Not Published
Height to Top of Cab Model	92.9 in	Not Applicable
▶Weight
Tractor Weight (Base)	ROPS: 4,035 lb; Cab: 4,420 lb	n/a
Weight with ROPS and Loader	Not Published	4,310 lb
Weight with Cab and Loader	Not Published	Not Applicable
▶Tire Options
Tire Size & Options	R1 Agricultural, R3 Turf, R4 Industrial	R1 Agricultural, R3 Turf, R4 Industrial
R1 Agricultural - Front	9.5-16	Farm Specialist 8.0-16 NHS TL 6PR
R1 Agricultural - Rear	13.6-28 standard; 16.9-24 optional	Farm Specialist 12.4-24 NHS TL 6PR
R3 Turf - Front	27x10.50-15	Multi-Trac CS 27x10.5-15 NHS TL 4PR
R3 Turf - Rear	44x18.00-20	12.5x20
R4 Industrial - Front	10-16.5	Trac Chief 10-16.50 NHS TL 6PR
R4 Industrial - Rear	14.9-24; 17.5L-24	Xtra Grip 43x16.00-20 NHS TL 6PR
▶Loader & Attachments
Quick Attach Loader System	FL2814: pin-type or skid steer	TX47: Quick attachment (Skid/Euro type)
Loader Model	FL2814	n/a
Loader Lift Height	FL2814: 111 in	105.6 in
Loader Lift Capacity (Full Height)	FL2814: 2,570 lb	2,152 lb
Loader Breakout Force	FL2814: 3,910 lb	3,198 lb
▶Warranty
Warranty Length & Coverage	5-year powertrain warranty	Up to 2 years or until the 2,000 hours mark, bumper-to-bumper warranty; 3000 hours maximum coverage period for parts and labour on drivetrains or powertrains; 12-months warranty period for implements, including loaders and backhoes.
▶ITC Company Accessories
Accessories that fit	None tagged yet	TYM T474 Brush Guard Insert $249.99 A must have if you are working with brush. TYM T474 Hydraulic Valve Cover $184.99 Engineered to protect the exposed hydraulic valve. Brush Guard Side Guards $199.99 Bolt onto the side of the OEM guard and offers wrap around protection TYM T474 Skid Plate $399.99 Major underside protection to save linkages, lines, valves, and filters.

Find a dealer near you→Find a TYM dealer near you→

Massey Ferguson 2850M vs TYM T474: Quick Answers

Which has more horsepower, the Massey Ferguson 2850M or the TYM T474?

The Massey Ferguson 2850M leads on engine hp at 48.8 hp hp, compared to 48.3 hp hp for the TYM T474.

Which has more PTO horsepower, the Massey Ferguson 2850M or the TYM T474?

The Massey Ferguson 2850M leads on pto hp at 38.1 hp hp, compared to 35.9 hp hp for the TYM T474.

Which is heavier, the Massey Ferguson 2850M or the TYM T474?

The Massey Ferguson 2850M leads on weight at 4,420 lb lb, compared to 4,310 lb lb for the TYM T474.

Which has more loader lift capacity, the Massey Ferguson 2850M or the TYM T474?

The Massey Ferguson 2850M leads on loader lift at 2,570 lb lb, compared to 2,152 lb lb for the TYM T474.

Which has more three-point hitch lift capacity, the Massey Ferguson 2850M or the TYM T474?

The Massey Ferguson 2850M leads on 3-pt lift (24 in) at 3,086 lb lb, compared to 1,764 lb lb for the TYM T474.

More Head-to-Heads