Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A hands-on walkthrough by an actual owner showing the complete fuel filter swap on a John Deere 5055E, filmed on the tractor itself. Covers shutting off the fuel valve, loosening the housing ring with an oil filter wrench, dropping and replacing the filter, and, the most useful part, bleeding air from the line using the vent valve and hand pump until diesel flows. Best for 5055E owners doing this job for the first time.
Raise the hood, shut off the fuel valve, remove the plastic ring with an oil filter wrench, drop out the old filter, install the new one, reattach the ring, and reopen the fuel valve.
Loosen the vent valve with a flathead screwdriver, pump the small hand pump until diesel squirts out, then snug the vent valve back to its original position.
You need an oil filter wrench, paper towels, a flathead screwdriver, and the replacement fuel filter.
It takes less than 10 minutes, probably closer to 5 minutes, according to the owner performing the job.