Bobcat CT1021 vs Case IH Farmall 25A

Every published spec for both machines, side by side. The verdict below is computed straight from the spec sheets, not opinion.

Across 8 measurable specs, the Case IH Farmall 25A leads 8 categories to 0. Machine pages: Bobcat CT1021 and Case IH Farmall 25A.

Want a third or fourth machine in the mix? Open this matchup in the comparison tool and add up to two more.

Category Verdict

Spec	Bobcat CT1021	Case IH Farmall 25A
Engine HP (hp)	21 hp	▲ 24.6 hp
PTO HP (hp)	16.3 hp	▲ 19.2 hp
Weight (lb)	1,521 lb	▲ 2,469 lb
Loader Lift (lb)	608 lb	▲ 1,214 lb
3-Pt Lift (24 in) (lb)	700 lb	▲ 1,433 lb
Lift Height (in)	71.9 in	▲ 94.3 in
Breakout Force (lbf)	1,554 lbf	▲ 1,926 lbf
Hydraulic Flow (gpm)	7.2 gpm	▲ 7.9 gpm
Travel Speed (mph)	11.1 mph	n/a

The headline numbers at a glance.

Bobcat CT1021Case IH Farmall 25A

Engine HPhp

21 hp

▲24.6 hp

PTO HPhp

16.3 hp

▲19.2 hp

Weightlb

1,521 lb

▲2,469 lb

Loader Liftlb

608 lb

▲1,214 lb

3-Pt Lift (24 in)lb

700 lb

▲1,433 lb

Share↓ Image 𝕏 f ✉

Full Spec Sheet

Every published spec, side by side, including the details the graphs above don't chart.

Spec	BobcatCT1021	Case IHFarmall 25A


Engine Manufacturer	Daedong	Mitsubishi
Engine Model	3C100LWH-U2	Not Published
Engine Type	Diesel	3-cylinder, turbocharged & aftercooled, Tier 4 B/Final
No. of Cylinders	3	3
Displacement	61.5 in³	80.4 in³
Rated Engine Speed	3200 rpm	2500 rpm
Engine Power (Gross)	21 hp	24.6 hp
PTO Power	16.3 hp	19.2 hp
Engine Emissions Constraints	Tier 4	Tier 4
Cooling System Type	Not Published	Liquid-cooled
Air Cleaner	Not Published	Not Published
Fuel System	Not Published	Not Published
Alternator	Not Published	Not Published

Pump Type	Not Published	Not Published
Implement Flow	Not Published	7.9 gpm
Steering Flow	Not Published	Not Published
Total Hydraulic Flow	7.2 gpm	Not Published
Overall Hydraulic Pump Flow	7.2 gpm	Not Published
Hydraulic System Type	Not Published	Open center
Rear Remote Hydraulic Flow	Not Published	Not Published
No. of Standard Remote Valves	None (rear hydraulics optional)	0
No. of Optional Remote Valves	1 pair	1

Fuel Tank Capacity	6.7 gal	7.4 gal
Coolant Capacity	Not Published	Not Published
Crankcase Capacity	Not Published	Not Published
Transmission / Hydraulic System Capacity	Not Published	Not Published
Front Axle Fluid Capacity	Not Published	Not Published

PTO Type	Independent	Independent
PTO Rear	540 rpm	540 rpm
Mid-PTO Availability	Standard: 2200 rpm	Optional, 2,000 rpm
Category, 3-Point Hitch	Category 1 Limited	Category 1
Hitch Lift Capacity	Not Published	Not Published
Hitch Lift Capacity (at 24”)	700 lb	1,433 lb
Lift Control Type	Hydraulic Position Control System	Not Published

Transmission Type	2-Range HST	hydrostatic (optional)
No. of Speeds	Infinite forward and reverse (2-range)	infinite
Max Travel Speed (Forward)	11.1 mph	Not Published
Max Travel Speed (Reverse)	7.6 mph	Not Published
Clutch	Not Published	Dry clutch
Differential Lock & Limited Slip Options	Rear differential lock (standard)	Mechanical differential lock

Frame Type	Not Published	Not Published
Steering	Hydrostatic power steering	Power steering
Brakes	Wet multi-disc	Not Published
Seat Suspension & Adjustability	Adjustable seat (standard)	Not Published
Front Axle Type	Four-wheel drive (standard)	Mechanical Front Drive (MFD)
Front Axle Rating	Not Published	Not Published
Drawbar Capacity	Not Published	Not Published

Overall Length with 3-Point Hitch	99.3 in	117.2 in
Overall Width	45.7 in	Not Published
Wheelbase	55.1 in	65.9 in
Ground Clearance	6.3 in	Not Published
Min. Turn Radius without Brakes	100.0 in (with brake applied)	Not Published
Height to Top of ROPS	87.6 in	88.2 in
Height to Top of ROPS (folded)	Not Published	68.2 in
Height to Top of Cab Model	Not Published	Not Published

Tractor Weight (Base)	1521 lb	2,469 lb
Weight with ROPS and Loader	Not Published	Not Published
Weight with Cab and Loader	Not Published	Not Published

Tire Size & Options	R1 Agricultural, R3 Turf, R4 Industrial	Not Published
R1 Agricultural - Front	18x8.5-10	Not Published
R1 Agricultural - Rear	26x12.00-12	Not Published
R3 Turf - Front	Not Published	Not Published
R3 Turf - Rear	Not Published	Not Published
R4 Industrial - Front	18x8.5-10	Not Published
R4 Industrial - Rear	26x12.00-12	Not Published

Quick Attach Loader System	Standard quick attach mounting system	Not Published
Loader Model	FL6	L330
Loader Lift Height	71.9 in	94.3 in
Loader Lift Capacity (Full Height)	608 lb	1214 lb
Loader Breakout Force	1554 lb	1926 lb

Warranty Length & Coverage	24 months or 1500 hours (whichever occurs first) on all components; powertrain and engine components 48 months (unlimited hours) for consumer purchasers, 36 months or 2000 hours for commercial purchasers	6-year extended warranty: 2 years bumper-to-bumper plus 4 additional years of powertrain protection

Find a dealer near you Find a Case IH dealer near you

Bobcat CT1021 vs Case IH Farmall 25A: Quick Answers

Which has more horsepower, the Bobcat CT1021 or the Case IH Farmall 25A?: The Case IH Farmall 25A leads on engine hp at 24.6 hp hp, compared to 21 hp hp for the Bobcat CT1021.
Which has more PTO horsepower, the Bobcat CT1021 or the Case IH Farmall 25A?: The Case IH Farmall 25A leads on pto hp at 19.2 hp hp, compared to 16.3 hp hp for the Bobcat CT1021.
Which is heavier, the Bobcat CT1021 or the Case IH Farmall 25A?: The Case IH Farmall 25A leads on weight at 2,469 lb lb, compared to 1,521 lb lb for the Bobcat CT1021.
Which has more loader lift capacity, the Bobcat CT1021 or the Case IH Farmall 25A?: The Case IH Farmall 25A leads on loader lift at 1,214 lb lb, compared to 608 lb lb for the Bobcat CT1021.
Which has more three-point hitch lift capacity, the Bobcat CT1021 or the Case IH Farmall 25A?: The Case IH Farmall 25A leads on 3-pt lift (24 in) at 1,433 lb lb, compared to 700 lb lb for the Bobcat CT1021.

More Head-to-Heads

Category Verdict

Spec	Bobcat CT1021	Case IH Farmall 25A
Engine HP (hp)	21 hp	▲ 24.6 hp
PTO HP (hp)	16.3 hp	▲ 19.2 hp
Weight (lb)	1,521 lb	▲ 2,469 lb
Loader Lift (lb)	608 lb	▲ 1,214 lb
3-Pt Lift (24 in) (lb)	700 lb	▲ 1,433 lb
Lift Height (in)	71.9 in	▲ 94.3 in
Breakout Force (lbf)	1,554 lbf	▲ 1,926 lbf
Hydraulic Flow (gpm)	7.2 gpm	▲ 7.9 gpm
Travel Speed (mph)	11.1 mph	n/a

The headline numbers at a glance.

Bobcat CT1021Case IH Farmall 25A

Engine HPhp

21 hp

▲24.6 hp

PTO HPhp

16.3 hp

▲19.2 hp

Weightlb

1,521 lb

▲2,469 lb

Loader Liftlb

608 lb

▲1,214 lb

3-Pt Lift (24 in)lb

700 lb

▲1,433 lb

Share↓ Image 𝕏 f ✉

Full Spec Sheet

Every published spec, side by side, including the details the graphs above don't chart.

Spec	BobcatCT1021	Case IHFarmall 25A


Engine Manufacturer	Daedong	Mitsubishi
Engine Model	3C100LWH-U2	Not Published
Engine Type	Diesel	3-cylinder, turbocharged & aftercooled, Tier 4 B/Final
No. of Cylinders	3	3
Displacement	61.5 in³	80.4 in³
Rated Engine Speed	3200 rpm	2500 rpm
Engine Power (Gross)	21 hp	24.6 hp
PTO Power	16.3 hp	19.2 hp
Engine Emissions Constraints	Tier 4	Tier 4
Cooling System Type	Not Published	Liquid-cooled
Air Cleaner	Not Published	Not Published
Fuel System	Not Published	Not Published
Alternator	Not Published	Not Published

Pump Type	Not Published	Not Published
Implement Flow	Not Published	7.9 gpm
Steering Flow	Not Published	Not Published
Total Hydraulic Flow	7.2 gpm	Not Published
Overall Hydraulic Pump Flow	7.2 gpm	Not Published
Hydraulic System Type	Not Published	Open center
Rear Remote Hydraulic Flow	Not Published	Not Published
No. of Standard Remote Valves	None (rear hydraulics optional)	0
No. of Optional Remote Valves	1 pair	1

Fuel Tank Capacity	6.7 gal	7.4 gal
Coolant Capacity	Not Published	Not Published
Crankcase Capacity	Not Published	Not Published
Transmission / Hydraulic System Capacity	Not Published	Not Published
Front Axle Fluid Capacity	Not Published	Not Published

PTO Type	Independent	Independent
PTO Rear	540 rpm	540 rpm
Mid-PTO Availability	Standard: 2200 rpm	Optional, 2,000 rpm
Category, 3-Point Hitch	Category 1 Limited	Category 1
Hitch Lift Capacity	Not Published	Not Published
Hitch Lift Capacity (at 24”)	700 lb	1,433 lb
Lift Control Type	Hydraulic Position Control System	Not Published

Transmission Type	2-Range HST	hydrostatic (optional)
No. of Speeds	Infinite forward and reverse (2-range)	infinite
Max Travel Speed (Forward)	11.1 mph	Not Published
Max Travel Speed (Reverse)	7.6 mph	Not Published
Clutch	Not Published	Dry clutch
Differential Lock & Limited Slip Options	Rear differential lock (standard)	Mechanical differential lock

Frame Type	Not Published	Not Published
Steering	Hydrostatic power steering	Power steering
Brakes	Wet multi-disc	Not Published
Seat Suspension & Adjustability	Adjustable seat (standard)	Not Published
Front Axle Type	Four-wheel drive (standard)	Mechanical Front Drive (MFD)
Front Axle Rating	Not Published	Not Published
Drawbar Capacity	Not Published	Not Published

Overall Length with 3-Point Hitch	99.3 in	117.2 in
Overall Width	45.7 in	Not Published
Wheelbase	55.1 in	65.9 in
Ground Clearance	6.3 in	Not Published
Min. Turn Radius without Brakes	100.0 in (with brake applied)	Not Published
Height to Top of ROPS	87.6 in	88.2 in
Height to Top of ROPS (folded)	Not Published	68.2 in
Height to Top of Cab Model	Not Published	Not Published

Tractor Weight (Base)	1521 lb	2,469 lb
Weight with ROPS and Loader	Not Published	Not Published
Weight with Cab and Loader	Not Published	Not Published

Tire Size & Options	R1 Agricultural, R3 Turf, R4 Industrial	Not Published
R1 Agricultural - Front	18x8.5-10	Not Published
R1 Agricultural - Rear	26x12.00-12	Not Published
R3 Turf - Front	Not Published	Not Published
R3 Turf - Rear	Not Published	Not Published
R4 Industrial - Front	18x8.5-10	Not Published
R4 Industrial - Rear	26x12.00-12	Not Published

Quick Attach Loader System	Standard quick attach mounting system	Not Published
Loader Model	FL6	L330
Loader Lift Height	71.9 in	94.3 in
Loader Lift Capacity (Full Height)	608 lb	1214 lb
Loader Breakout Force	1554 lb	1926 lb

Warranty Length & Coverage	24 months or 1500 hours (whichever occurs first) on all components; powertrain and engine components 48 months (unlimited hours) for consumer purchasers, 36 months or 2000 hours for commercial purchasers	6-year extended warranty: 2 years bumper-to-bumper plus 4 additional years of powertrain protection

Find a dealer near you Find a Case IH dealer near you

Bobcat CT1021 vs Case IH Farmall 25A: Quick Answers

Which has more horsepower, the Bobcat CT1021 or the Case IH Farmall 25A?

The Case IH Farmall 25A leads on engine hp at 24.6 hp hp, compared to 21 hp hp for the Bobcat CT1021.

Which has more PTO horsepower, the Bobcat CT1021 or the Case IH Farmall 25A?

The Case IH Farmall 25A leads on pto hp at 19.2 hp hp, compared to 16.3 hp hp for the Bobcat CT1021.

Which is heavier, the Bobcat CT1021 or the Case IH Farmall 25A?

The Case IH Farmall 25A leads on weight at 2,469 lb lb, compared to 1,521 lb lb for the Bobcat CT1021.

Which has more loader lift capacity, the Bobcat CT1021 or the Case IH Farmall 25A?

The Case IH Farmall 25A leads on loader lift at 1,214 lb lb, compared to 608 lb lb for the Bobcat CT1021.

Which has more three-point hitch lift capacity, the Bobcat CT1021 or the Case IH Farmall 25A?

The Case IH Farmall 25A leads on 3-pt lift (24 in) at 1,433 lb lb, compared to 700 lb lb for the Bobcat CT1021.

Bobcat CT1021 vs Case IH Farmall 25A

Category Verdict

Full Spec Sheet

Bobcat CT1021 vs Case IH Farmall 25A: Quick Answers

More Head-to-Heads

More in the resource center

Look up a tractor

Side-by-side comparison

The Netflix of tractor videos

Tractor guides and articles

Bobcat CT1021 vs Case IH Farmall 25A

Category Verdict

Full Spec Sheet

Bobcat CT1021 vs Case IH Farmall 25A: Quick Answers

More Head-to-Heads