Bobcat CT1021 vs Mahindra 1120 HST Cab

Every published spec for both machines, side by side. The verdict below is computed straight from the spec sheets, not opinion.

Across 9 measurable specs, the Bobcat CT1021 leads 5 categories to 4. Machine pages: Bobcat CT1021 and Mahindra 1120 HST Cab.

Want a third or fourth machine in the mix? Open this matchup in the comparison tool and add up to two more.

Category Verdict

Spec	Bobcat CT1021	Mahindra 1120 HST Cab
Engine HP (hp)	▲ 21 hp	20.1 hp
PTO HP (hp)	▲ 16.3 hp	13.9 hp
Weight (lb)	1,521 lb	▲ 1,962 lb
Loader Lift (lb)	608 lb	▲ 794 lb
3-Pt Lift (24 in) (lb)	700 lb	▲ 771 lb
Lift Height (in)	▲ 71.9 in	68 in
Breakout Force (lbf)	▲ 1,554 lbf	1,433 lbf
Hydraulic Flow (gpm)	7.2 gpm	▲ 11.2 gpm
Travel Speed (mph)	▲ 11.1 mph	7.3 mph

The headline numbers at a glance.

Bobcat CT1021Mahindra 1120 HST Cab

Engine HPhp

▲21 hp

20.1 hp

PTO HPhp

▲16.3 hp

13.9 hp

Weightlb

1,521 lb

▲1,962 lb

Loader Liftlb

608 lb

▲794 lb

3-Pt Lift (24 in)lb

700 lb

▲771 lb

Share↓ Image 𝕏 f ✉

Full Spec Sheet

Every published spec, side by side, including the details the graphs above don't chart.

Spec	BobcatCT1021	Mahindra1120 HST Cab


Engine Manufacturer	Daedong	Mitsubishi
Engine Model	3C100LWH-U2	MVL3E3
Engine Type	Diesel	Four Stroke, Naturally Aspirated, Indirect Injection, Water-Cooled Diesel
No. of Cylinders	3	3
Displacement	61.5 in³	67.2 in³
Rated Engine Speed	3200 rpm	2900 rpm
Engine Power (Gross)	21 hp	20.1 hp
PTO Power	16.3 hp	13.9 hp
Engine Emissions Constraints	Tier 4	No DPF
Cooling System Type	Not Published	Water-Cooled
Air Cleaner	Not Published	Not Published
Fuel System	Not Published	Indirect Injection
Alternator	Not Published	55 A, 12 V

Pump Type	Not Published	Not Published
Implement Flow	Not Published	7.6 gpm
Steering Flow	Not Published	3.8 gpm
Total Hydraulic Flow	7.2 gpm	11.2 gpm
Overall Hydraulic Pump Flow	7.2 gpm	11.2 gpm
Hydraulic System Type	Not Published	Open Center, full-live hydraulic with position control
Rear Remote Hydraulic Flow	Not Published	Not Published
No. of Standard Remote Valves	None (rear hydraulics optional)	Not Published
No. of Optional Remote Valves	1 pair	Single or dual

Fuel Tank Capacity	6.7 gal	6.6 gal
Coolant Capacity	Not Published	Not Published
Crankcase Capacity	Not Published	Not Published
Transmission / Hydraulic System Capacity	Not Published	Not Published
Front Axle Fluid Capacity	Not Published	Not Published

PTO Type	Independent	Independent Wet Clutch
PTO Rear	540 rpm	540 rpm @ 2837 rpm
Mid-PTO Availability	Standard: 2200 rpm	Optional; 2500 rpm @ 2837 rpm
Category, 3-Point Hitch	Category I Limited	CAT I with check chains
Hitch Lift Capacity	Not Published	Not Published
Hitch Lift Capacity (at 24”)	700 lb	771 lb
Lift Control Type	Hydraulic Position Control System	Position Control

Transmission Type	2-Range HST	HST - 2 Range
No. of Speeds	Infinite forward and reverse (2-range)	Infinite
Max Travel Speed (Forward)	11.1 mph	7.3 mph
Max Travel Speed (Reverse)	7.6 mph	Not Published
Clutch	Not Published	Not Published
Differential Lock & Limited Slip Options	Rear differential lock (standard)	Not Published

Frame Type	Not Published	Not Published
Steering	Hydrostatic power steering	Hydrostatic Power Steering
Brakes	Wet multi-disc	Single Pedal
Seat Suspension & Adjustability	Adjustable seat (standard)	Not Published
Front Axle Type	Four-wheel drive (standard)	Not Published
Front Axle Rating	Not Published	Not Published
Drawbar Capacity	Not Published	Not Published

Overall Width	45.7 in (with industrial tires)	46.3 in
Wheelbase	55.1 in	55.1 in
Ground Clearance	6.3 in	6.7 in
Min. Turn Radius without Brakes	8.4 ft	7.2 ft (with brake applied)
Height to Top of ROPS	87.6 in	Not Published
Height to Top of ROPS (folded)	Not Published	Not Published
Height to Top of Cab Model	Not Published	80.5 in
Overall Length	99.3 in (with 3-point hitch)	100.4 in

Tractor Weight (Base)	1,521 lb	1,962 lb (operating weight)
Weight with ROPS and Loader	Not Published	Not Published
Weight with Cab and Loader	Not Published	2,368 lb (1,962 operating weight + 406 loader shipping weight, computed)

Tire Size & Options	Turf, Industrial, Agricultural	Turf, Industrial
R1 Agricultural - Front	18x8.5-10	Not Published
R1 Agricultural - Rear	26x12.00-12	Not Published
R3 Turf - Front	Not Published	18x8.5-10
R3 Turf - Rear	Not Published	26x12-12
R4 Industrial - Front	18x8.5-10	18x8.5-10
R4 Industrial - Rear	26x12.00-12	26x12-12

Quick Attach Loader System	Standard quick attach mounting system	L11: Front loader skid-steer couplers for superfast hookups
Loader Model	FL6	L11
Loader Lift Height	71.9 in (to pivot pin)	L11: 68 in
Loader Lift Capacity (Full Height)	608 lb	L11: 794 lb (at pivot pin)
Loader Breakout Force	1,554 lb (at pivot pin)	L11: 1,433 lb

Warranty Length & Coverage	Basic 24 months or 1,500 hours, on all components; powertrain 48 months, unlimited hours, for consumer purchasers, or 36 months or 2,000 hours for commercial purchasers	7-Year Limited Powertrain Warranty

Find a dealer near you Find a Mahindra dealer near you

Bobcat CT1021 vs Mahindra 1120 HST Cab: Quick Answers

Which has more horsepower, the Bobcat CT1021 or the Mahindra 1120 HST Cab?: The Bobcat CT1021 leads on engine hp at 21 hp hp, compared to 20.1 hp hp for the Mahindra 1120 HST Cab.
Which has more PTO horsepower, the Bobcat CT1021 or the Mahindra 1120 HST Cab?: The Bobcat CT1021 leads on pto hp at 16.3 hp hp, compared to 13.9 hp hp for the Mahindra 1120 HST Cab.
Which is heavier, the Bobcat CT1021 or the Mahindra 1120 HST Cab?: The Mahindra 1120 HST Cab leads on weight at 1,962 lb lb, compared to 1,521 lb lb for the Bobcat CT1021.
Which has more loader lift capacity, the Bobcat CT1021 or the Mahindra 1120 HST Cab?: The Mahindra 1120 HST Cab leads on loader lift at 794 lb lb, compared to 608 lb lb for the Bobcat CT1021.
Which has more three-point hitch lift capacity, the Bobcat CT1021 or the Mahindra 1120 HST Cab?: The Mahindra 1120 HST Cab leads on 3-pt lift (24 in) at 771 lb lb, compared to 700 lb lb for the Bobcat CT1021.

More Head-to-Heads

Category Verdict

Spec	Bobcat CT1021	Mahindra 1120 HST Cab
Engine HP (hp)	▲ 21 hp	20.1 hp
PTO HP (hp)	▲ 16.3 hp	13.9 hp
Weight (lb)	1,521 lb	▲ 1,962 lb
Loader Lift (lb)	608 lb	▲ 794 lb
3-Pt Lift (24 in) (lb)	700 lb	▲ 771 lb
Lift Height (in)	▲ 71.9 in	68 in
Breakout Force (lbf)	▲ 1,554 lbf	1,433 lbf
Hydraulic Flow (gpm)	7.2 gpm	▲ 11.2 gpm
Travel Speed (mph)	▲ 11.1 mph	7.3 mph

The headline numbers at a glance.

Bobcat CT1021Mahindra 1120 HST Cab

Engine HPhp

▲21 hp

20.1 hp

PTO HPhp

▲16.3 hp

13.9 hp

Weightlb

1,521 lb

▲1,962 lb

Loader Liftlb

608 lb

▲794 lb

3-Pt Lift (24 in)lb

700 lb

▲771 lb

Share↓ Image 𝕏 f ✉

Full Spec Sheet

Every published spec, side by side, including the details the graphs above don't chart.

Spec	BobcatCT1021	Mahindra1120 HST Cab


Engine Manufacturer	Daedong	Mitsubishi
Engine Model	3C100LWH-U2	MVL3E3
Engine Type	Diesel	Four Stroke, Naturally Aspirated, Indirect Injection, Water-Cooled Diesel
No. of Cylinders	3	3
Displacement	61.5 in³	67.2 in³
Rated Engine Speed	3200 rpm	2900 rpm
Engine Power (Gross)	21 hp	20.1 hp
PTO Power	16.3 hp	13.9 hp
Engine Emissions Constraints	Tier 4	No DPF
Cooling System Type	Not Published	Water-Cooled
Air Cleaner	Not Published	Not Published
Fuel System	Not Published	Indirect Injection
Alternator	Not Published	55 A, 12 V

Pump Type	Not Published	Not Published
Implement Flow	Not Published	7.6 gpm
Steering Flow	Not Published	3.8 gpm
Total Hydraulic Flow	7.2 gpm	11.2 gpm
Overall Hydraulic Pump Flow	7.2 gpm	11.2 gpm
Hydraulic System Type	Not Published	Open Center, full-live hydraulic with position control
Rear Remote Hydraulic Flow	Not Published	Not Published
No. of Standard Remote Valves	None (rear hydraulics optional)	Not Published
No. of Optional Remote Valves	1 pair	Single or dual

Fuel Tank Capacity	6.7 gal	6.6 gal
Coolant Capacity	Not Published	Not Published
Crankcase Capacity	Not Published	Not Published
Transmission / Hydraulic System Capacity	Not Published	Not Published
Front Axle Fluid Capacity	Not Published	Not Published

PTO Type	Independent	Independent Wet Clutch
PTO Rear	540 rpm	540 rpm @ 2837 rpm
Mid-PTO Availability	Standard: 2200 rpm	Optional; 2500 rpm @ 2837 rpm
Category, 3-Point Hitch	Category I Limited	CAT I with check chains
Hitch Lift Capacity	Not Published	Not Published
Hitch Lift Capacity (at 24”)	700 lb	771 lb
Lift Control Type	Hydraulic Position Control System	Position Control

Transmission Type	2-Range HST	HST - 2 Range
No. of Speeds	Infinite forward and reverse (2-range)	Infinite
Max Travel Speed (Forward)	11.1 mph	7.3 mph
Max Travel Speed (Reverse)	7.6 mph	Not Published
Clutch	Not Published	Not Published
Differential Lock & Limited Slip Options	Rear differential lock (standard)	Not Published

Frame Type	Not Published	Not Published
Steering	Hydrostatic power steering	Hydrostatic Power Steering
Brakes	Wet multi-disc	Single Pedal
Seat Suspension & Adjustability	Adjustable seat (standard)	Not Published
Front Axle Type	Four-wheel drive (standard)	Not Published
Front Axle Rating	Not Published	Not Published
Drawbar Capacity	Not Published	Not Published

Overall Width	45.7 in (with industrial tires)	46.3 in
Wheelbase	55.1 in	55.1 in
Ground Clearance	6.3 in	6.7 in
Min. Turn Radius without Brakes	8.4 ft	7.2 ft (with brake applied)
Height to Top of ROPS	87.6 in	Not Published
Height to Top of ROPS (folded)	Not Published	Not Published
Height to Top of Cab Model	Not Published	80.5 in
Overall Length	99.3 in (with 3-point hitch)	100.4 in

Tractor Weight (Base)	1,521 lb	1,962 lb (operating weight)
Weight with ROPS and Loader	Not Published	Not Published
Weight with Cab and Loader	Not Published	2,368 lb (1,962 operating weight + 406 loader shipping weight, computed)

Tire Size & Options	Turf, Industrial, Agricultural	Turf, Industrial
R1 Agricultural - Front	18x8.5-10	Not Published
R1 Agricultural - Rear	26x12.00-12	Not Published
R3 Turf - Front	Not Published	18x8.5-10
R3 Turf - Rear	Not Published	26x12-12
R4 Industrial - Front	18x8.5-10	18x8.5-10
R4 Industrial - Rear	26x12.00-12	26x12-12

Quick Attach Loader System	Standard quick attach mounting system	L11: Front loader skid-steer couplers for superfast hookups
Loader Model	FL6	L11
Loader Lift Height	71.9 in (to pivot pin)	L11: 68 in
Loader Lift Capacity (Full Height)	608 lb	L11: 794 lb (at pivot pin)
Loader Breakout Force	1,554 lb (at pivot pin)	L11: 1,433 lb

Warranty Length & Coverage	Basic 24 months or 1,500 hours, on all components; powertrain 48 months, unlimited hours, for consumer purchasers, or 36 months or 2,000 hours for commercial purchasers	7-Year Limited Powertrain Warranty

Find a dealer near you Find a Mahindra dealer near you

Bobcat CT1021 vs Mahindra 1120 HST Cab: Quick Answers

Which has more horsepower, the Bobcat CT1021 or the Mahindra 1120 HST Cab?

The Bobcat CT1021 leads on engine hp at 21 hp hp, compared to 20.1 hp hp for the Mahindra 1120 HST Cab.

Which has more PTO horsepower, the Bobcat CT1021 or the Mahindra 1120 HST Cab?

The Bobcat CT1021 leads on pto hp at 16.3 hp hp, compared to 13.9 hp hp for the Mahindra 1120 HST Cab.

Which is heavier, the Bobcat CT1021 or the Mahindra 1120 HST Cab?

The Mahindra 1120 HST Cab leads on weight at 1,962 lb lb, compared to 1,521 lb lb for the Bobcat CT1021.

Which has more loader lift capacity, the Bobcat CT1021 or the Mahindra 1120 HST Cab?

The Mahindra 1120 HST Cab leads on loader lift at 794 lb lb, compared to 608 lb lb for the Bobcat CT1021.

Which has more three-point hitch lift capacity, the Bobcat CT1021 or the Mahindra 1120 HST Cab?

The Mahindra 1120 HST Cab leads on 3-pt lift (24 in) at 771 lb lb, compared to 700 lb lb for the Bobcat CT1021.

Bobcat CT1021 vs Mahindra 1120 HST Cab

Category Verdict

Full Spec Sheet

Bobcat CT1021 vs Mahindra 1120 HST Cab: Quick Answers

More Head-to-Heads

More in the resource center

Look up a tractor

Side-by-side comparison

The Netflix of tractor videos

Tractor guides and articles

Bobcat CT1021 vs Mahindra 1120 HST Cab

Category Verdict

Full Spec Sheet

Bobcat CT1021 vs Mahindra 1120 HST Cab: Quick Answers

More Head-to-Heads