Case IH Farmall 35C Gear vs New Holland Boomer 35

Every published spec for both machines, side by side. The verdict below is computed straight from the spec sheets, not opinion.

Across 9 measurable specs, the New Holland Boomer 35 leads 4 categories to 3 (2 tied). Machine pages: Case IH Farmall 35C Gear and New Holland Boomer 35.

Want a third or fourth machine in the mix? Open this matchup in the comparison tool and add up to two more.

Category Verdict

Spec	Case IH Farmall 35C Gear	New Holland Boomer 35
Engine HP (hp)	35 hp	35 hp
PTO HP (hp)	29.7 hp	29.7 hp
Weight (lb)	▲ 3,175 lb	2,870 lb
Loader Lift (lb)	1,540 lb	▲ 1,822 lb
3-Pt Lift (24 in) (lb)	▲ 1,808 lb	1,345 lb
Lift Height (in)	▲ 105 in	104 in
Breakout Force (lbf)	2,640 lbf	▲ 3,257 lbf
Hydraulic Flow (gpm)	12.4 gpm	▲ 13.5 gpm
Travel Speed (mph)	14.2 mph	▲ 14.8 mph

The headline numbers at a glance.

Case IH Farmall 35C GearNew Holland Boomer 35

Engine HPhp

▲35 hp

PTO HPhp

▲29.7 hp

28 hp

GearHST

Weightlb

▲3,175 lb

2,804 lb

2,870 lb

GearHST

Loader Liftlb

1,540 lb

▲1,822 lb

3-Pt Lift (24 in)lb

▲1,808 lb

1,345 lb

Share↓ Image 𝕏 f ✉

Full Spec Sheet

Every published spec, side by side, including the details the graphs above don't chart.

Spec	Case IHFarmall 35C Gear	New HollandBoomer 35


Engine Manufacturer	LS Mtron	LS Mtron
Engine Model	L3C19-T5	L3CRV-T5
Engine Type	Not Published	3-cylinder, turbocharged, liquid-cooled diesel
No. of Cylinders	3	3
Displacement	115.9 in³	114.7 in³
Rated Engine Speed	2600 rpm	2600 rpm
Engine Power (Gross)	35 hp	35 hp
PTO Power	29.7 hp	Gear: 29.7 hp; HST: 28 hp
Engine Emissions Constraints	Tier 4	Tier 4B (final)
Cooling System Type	Not Published	Liquid cooled
Air Cleaner	Replaceable dry element	Replaceable primary and inner elements
Fuel System	Not Published	Electronically controlled common rail direct injection
Alternator	70 A	70 A, 12 V

Pump Type	Not Published	Gear
Implement Flow	8.2 gpm	8.2 gpm
Steering Flow	4.2 gpm	Gear: 4.2 gpm; HST: 5.3 gpm
Total Hydraulic Flow	12.4 gpm (8.2 + 4.2, computed)	Gear: 12.4 gpm; HST: 13.5 gpm
Overall Hydraulic Pump Flow	Not Published	Gear: 12.4 gpm; HST: 13.5 gpm
Hydraulic System Type	Open center	Open center
Rear Remote Hydraulic Flow	Not Published	Not Published
No. of Standard Remote Valves	1	1
No. of Optional Remote Valves	2	Up to 2 (second valve optional)

Fuel Tank Capacity	10.5 gal	10.5 gal
Coolant Capacity	Not Published	7.5 qt
Crankcase Capacity	Not Published	5.8 qt
Transmission / Hydraulic System Capacity	Not Published	8.5 gal
Front Axle Fluid Capacity	Not Published	6.87 qt

PTO Type	Independent rear PTO, electro-hydraulic engagement	Independent, electro-hydraulic engagement
PTO Rear	540 rpm	540 rpm
Mid-PTO Availability	Optional, 2000 rpm	Standard (2000 rpm)
Category, 3-Point Hitch	Category I	Category I
Hitch Lift Capacity	Not Published	1,808 lb
Hitch Lift Capacity (at 24”)	1,808 lb	1,345 lb
Lift Control Type	Mechanical draft control (MDC)	Position control (draft control optional)

Transmission Type	12 x 12 mechanical shuttle with synchro shift	Gear: 12x12 synchronized shuttle shift (SSS); HST: 3-range hydrostatic, dual pedal
No. of Speeds	12 forward, 12 reverse	Gear: 12F/12R; HST: 3-range
Max Travel Speed (Forward)	14.2 mph	Gear: 14.2 mph; HST: 14.8 mph
Max Travel Speed (Reverse)	Not Published	Gear: 13.63 mph; HST: 13.60 mph
Clutch	dry clutch	Gear: dry single disc (9.4 in); HST: n/a
Differential Lock & Limited Slip Options	Mechanical differential lock	Mechanical rear differential lock (pedal)

Frame Type	Not Published	Not Published
Steering	Power steering	Power steering
Brakes	Wet multi-disc	Wet multi-disc
Seat Suspension & Adjustability	Adjustable suspension seat	Adjustable suspension seat (fore/aft, weight and height adjustment)
Front Axle Type	Mechanical Front Drive (MFD)	Four-wheel drive (FWD)
Front Axle Rating	Not Published	Not Published
Drawbar Capacity	Not Published	Not Published

Overall Width	66.4 in	66.4 in
Wheelbase	66 in	66 in
Ground Clearance	Not Published	Not Published
Min. Turn Radius without Brakes	Not Published	9.2 ft (with brake applied)
Height to Top of ROPS	Not Published	92.7 in
Height to Top of ROPS (folded)	74.1 in	Not Published
Height to Top of Cab Model	Not Published	Not Published
Overall Length	122.5 in	119 in

Tractor Weight (Base)	3,175 lb	Gear: 2,804 lb; HST: 2,870 lb
Weight with ROPS and Loader	Not Published	Not Published
Weight with Cab and Loader	Not Published	Not Published

Tire Size & Options	R1 Agricultural; R3 Turf; R4 Industrial	R1 Agricultural, R3 Turf, R4 Industrial
R1 Agricultural - Front	7-14	7-14
R1 Agricultural - Rear	11.2-24	11.2-24
R3 Turf - Front	25x8.50-14	25x8.50-14
R3 Turf - Rear	41x14.00-20	41x14.00-20
R4 Industrial - Front	25x8.50-14	25x8.50-14
R4 Industrial - Rear	43x16.00-20	43x16.00-20

Quick Attach Loader System	Quick-Attach faceplate; mid-mount frame with fast loader connect and disconnect (L350A)	Tool-free loader mount; optional skid-steer quick-attach plates
Loader Model	L350A	250TLA
Loader Lift Height	105 in	250TLA: 104 in (at pivot pin)
Loader Lift Capacity (Full Height)	1,540 lb at 31.5 in forward of pivot pin	250TLA: 1,822 lb (at bucket pivot pin, max height)
Loader Breakout Force	2,640 lb	250TLA: 3,257 lb (at bucket pivot pin)

Warranty Length & Coverage	Basic 2 years; powertrain 4 additional years (6-year, 72-month total)	Basic 2 years or 750 hours; powertrain 4 more years (6 years or 1,500 hours total)

Find a Case IH dealer near you Find a New Holland dealer near you

Case IH Farmall 35C Gear vs New Holland Boomer 35: Quick Answers

Which has more horsepower, the Case IH Farmall 35C Gear or the New Holland Boomer 35?: They are effectively tied: both machines are rated at 35 hp hp for engine hp.
Which has more PTO horsepower, the Case IH Farmall 35C Gear or the New Holland Boomer 35?: They are effectively tied: both machines are rated at 29.7 hp hp for pto hp.
Which is heavier, the Case IH Farmall 35C Gear or the New Holland Boomer 35?: The Case IH Farmall 35C Gear leads on weight at 3,175 lb lb, compared to 2,870 lb lb for the New Holland Boomer 35.
Which has more loader lift capacity, the Case IH Farmall 35C Gear or the New Holland Boomer 35?: The New Holland Boomer 35 leads on loader lift at 1,822 lb lb, compared to 1,540 lb lb for the Case IH Farmall 35C Gear.
Which has more three-point hitch lift capacity, the Case IH Farmall 35C Gear or the New Holland Boomer 35?: The Case IH Farmall 35C Gear leads on 3-pt lift (24 in) at 1,808 lb lb, compared to 1,345 lb lb for the New Holland Boomer 35.

More Head-to-Heads

Category Verdict

Spec	Case IH Farmall 35C Gear	New Holland Boomer 35
Engine HP (hp)	35 hp	35 hp
PTO HP (hp)	29.7 hp	29.7 hp
Weight (lb)	▲ 3,175 lb	2,870 lb
Loader Lift (lb)	1,540 lb	▲ 1,822 lb
3-Pt Lift (24 in) (lb)	▲ 1,808 lb	1,345 lb
Lift Height (in)	▲ 105 in	104 in
Breakout Force (lbf)	2,640 lbf	▲ 3,257 lbf
Hydraulic Flow (gpm)	12.4 gpm	▲ 13.5 gpm
Travel Speed (mph)	14.2 mph	▲ 14.8 mph

The headline numbers at a glance.

Case IH Farmall 35C GearNew Holland Boomer 35

Engine HPhp

▲35 hp

PTO HPhp

▲29.7 hp

28 hp

GearHST

Weightlb

▲3,175 lb

2,804 lb

2,870 lb

GearHST

Loader Liftlb

1,540 lb

▲1,822 lb

3-Pt Lift (24 in)lb

▲1,808 lb

1,345 lb

Share↓ Image 𝕏 f ✉

Full Spec Sheet

Every published spec, side by side, including the details the graphs above don't chart.

Spec	Case IHFarmall 35C Gear	New HollandBoomer 35


Engine Manufacturer	LS Mtron	LS Mtron
Engine Model	L3C19-T5	L3CRV-T5
Engine Type	Not Published	3-cylinder, turbocharged, liquid-cooled diesel
No. of Cylinders	3	3
Displacement	115.9 in³	114.7 in³
Rated Engine Speed	2600 rpm	2600 rpm
Engine Power (Gross)	35 hp	35 hp
PTO Power	29.7 hp	Gear: 29.7 hp; HST: 28 hp
Engine Emissions Constraints	Tier 4	Tier 4B (final)
Cooling System Type	Not Published	Liquid cooled
Air Cleaner	Replaceable dry element	Replaceable primary and inner elements
Fuel System	Not Published	Electronically controlled common rail direct injection
Alternator	70 A	70 A, 12 V

Pump Type	Not Published	Gear
Implement Flow	8.2 gpm	8.2 gpm
Steering Flow	4.2 gpm	Gear: 4.2 gpm; HST: 5.3 gpm
Total Hydraulic Flow	12.4 gpm (8.2 + 4.2, computed)	Gear: 12.4 gpm; HST: 13.5 gpm
Overall Hydraulic Pump Flow	Not Published	Gear: 12.4 gpm; HST: 13.5 gpm
Hydraulic System Type	Open center	Open center
Rear Remote Hydraulic Flow	Not Published	Not Published
No. of Standard Remote Valves	1	1
No. of Optional Remote Valves	2	Up to 2 (second valve optional)

Fuel Tank Capacity	10.5 gal	10.5 gal
Coolant Capacity	Not Published	7.5 qt
Crankcase Capacity	Not Published	5.8 qt
Transmission / Hydraulic System Capacity	Not Published	8.5 gal
Front Axle Fluid Capacity	Not Published	6.87 qt

PTO Type	Independent rear PTO, electro-hydraulic engagement	Independent, electro-hydraulic engagement
PTO Rear	540 rpm	540 rpm
Mid-PTO Availability	Optional, 2000 rpm	Standard (2000 rpm)
Category, 3-Point Hitch	Category I	Category I
Hitch Lift Capacity	Not Published	1,808 lb
Hitch Lift Capacity (at 24”)	1,808 lb	1,345 lb
Lift Control Type	Mechanical draft control (MDC)	Position control (draft control optional)

Transmission Type	12 x 12 mechanical shuttle with synchro shift	Gear: 12x12 synchronized shuttle shift (SSS); HST: 3-range hydrostatic, dual pedal
No. of Speeds	12 forward, 12 reverse	Gear: 12F/12R; HST: 3-range
Max Travel Speed (Forward)	14.2 mph	Gear: 14.2 mph; HST: 14.8 mph
Max Travel Speed (Reverse)	Not Published	Gear: 13.63 mph; HST: 13.60 mph
Clutch	dry clutch	Gear: dry single disc (9.4 in); HST: n/a
Differential Lock & Limited Slip Options	Mechanical differential lock	Mechanical rear differential lock (pedal)

Frame Type	Not Published	Not Published
Steering	Power steering	Power steering
Brakes	Wet multi-disc	Wet multi-disc
Seat Suspension & Adjustability	Adjustable suspension seat	Adjustable suspension seat (fore/aft, weight and height adjustment)
Front Axle Type	Mechanical Front Drive (MFD)	Four-wheel drive (FWD)
Front Axle Rating	Not Published	Not Published
Drawbar Capacity	Not Published	Not Published

Overall Width	66.4 in	66.4 in
Wheelbase	66 in	66 in
Ground Clearance	Not Published	Not Published
Min. Turn Radius without Brakes	Not Published	9.2 ft (with brake applied)
Height to Top of ROPS	Not Published	92.7 in
Height to Top of ROPS (folded)	74.1 in	Not Published
Height to Top of Cab Model	Not Published	Not Published
Overall Length	122.5 in	119 in

Tractor Weight (Base)	3,175 lb	Gear: 2,804 lb; HST: 2,870 lb
Weight with ROPS and Loader	Not Published	Not Published
Weight with Cab and Loader	Not Published	Not Published

Tire Size & Options	R1 Agricultural; R3 Turf; R4 Industrial	R1 Agricultural, R3 Turf, R4 Industrial
R1 Agricultural - Front	7-14	7-14
R1 Agricultural - Rear	11.2-24	11.2-24
R3 Turf - Front	25x8.50-14	25x8.50-14
R3 Turf - Rear	41x14.00-20	41x14.00-20
R4 Industrial - Front	25x8.50-14	25x8.50-14
R4 Industrial - Rear	43x16.00-20	43x16.00-20

Quick Attach Loader System	Quick-Attach faceplate; mid-mount frame with fast loader connect and disconnect (L350A)	Tool-free loader mount; optional skid-steer quick-attach plates
Loader Model	L350A	250TLA
Loader Lift Height	105 in	250TLA: 104 in (at pivot pin)
Loader Lift Capacity (Full Height)	1,540 lb at 31.5 in forward of pivot pin	250TLA: 1,822 lb (at bucket pivot pin, max height)
Loader Breakout Force	2,640 lb	250TLA: 3,257 lb (at bucket pivot pin)

Warranty Length & Coverage	Basic 2 years; powertrain 4 additional years (6-year, 72-month total)	Basic 2 years or 750 hours; powertrain 4 more years (6 years or 1,500 hours total)

Find a Case IH dealer near you Find a New Holland dealer near you

Case IH Farmall 35C Gear vs New Holland Boomer 35: Quick Answers

Which has more horsepower, the Case IH Farmall 35C Gear or the New Holland Boomer 35?

They are effectively tied: both machines are rated at 35 hp hp for engine hp.

Which has more PTO horsepower, the Case IH Farmall 35C Gear or the New Holland Boomer 35?

They are effectively tied: both machines are rated at 29.7 hp hp for pto hp.

Which is heavier, the Case IH Farmall 35C Gear or the New Holland Boomer 35?

The Case IH Farmall 35C Gear leads on weight at 3,175 lb lb, compared to 2,870 lb lb for the New Holland Boomer 35.

Which has more loader lift capacity, the Case IH Farmall 35C Gear or the New Holland Boomer 35?

The New Holland Boomer 35 leads on loader lift at 1,822 lb lb, compared to 1,540 lb lb for the Case IH Farmall 35C Gear.

Which has more three-point hitch lift capacity, the Case IH Farmall 35C Gear or the New Holland Boomer 35?

The Case IH Farmall 35C Gear leads on 3-pt lift (24 in) at 1,808 lb lb, compared to 1,345 lb lb for the New Holland Boomer 35.

Case IH Farmall 35C Gear vs New Holland Boomer 35

Category Verdict

Full Spec Sheet

Case IH Farmall 35C Gear vs New Holland Boomer 35: Quick Answers

More Head-to-Heads

More in the resource center

Look up a tractor

Side-by-side comparison

The Netflix of tractor videos

Tractor guides and articles

Case IH Farmall 35C Gear vs New Holland Boomer 35

Category Verdict

Full Spec Sheet

Case IH Farmall 35C Gear vs New Holland Boomer 35: Quick Answers

More Head-to-Heads