Case IH Farmall 40A Mechanical vs New Holland Workmaster 40C

Every published spec for both machines, side by side. The verdict below is computed straight from the spec sheets, not opinion.

Across 9 measurable specs, the New Holland Workmaster 40C leads 4 categories to 1 (4 tied). Machine pages: Case IH Farmall 40A Mechanical and New Holland Workmaster 40C.

Want a third or fourth machine in the mix? Open this matchup in the comparison tool and add up to two more.

Category Verdict

Spec	Case IH Farmall 40A Mechanical	New Holland Workmaster 40C
Engine HP (hp)	40 hp	40 hp
PTO HP (hp)	35.9 hp	35.9 hp
Weight (lb)	3,053 lb	▲ 3,073 lb
Loader Lift (lb)	890 lb	▲ 1,344 lb
3-Pt Lift (24 in) (lb)	1,596 lb	1,596 lb
Lift Height (in)	▲ 98 in	92 in
Breakout Force (lbf)	1,900 lbf	▲ 2,138 lbf
Hydraulic Flow (gpm)	13.3 gpm	13.3 gpm
Travel Speed (mph)	14.2 mph	▲ 14.9 mph

The headline numbers at a glance.

Case IH Farmall 40A MechanicalNew Holland Workmaster 40C

Engine HPhp

▲40 hp

PTO HPhp

▲35.9 hp

34.8 hp

GearHST

Weightlb

3,053 lb

▲3,073 lb

Loader Liftlb

890 lb

▲1,344 lb

3-Pt Lift (24 in)lb

▲1,596 lb

Share↓ Image 𝕏 f ✉

Full Spec Sheet

Every published spec, side by side, including the details the graphs above don't chart.

Spec	Case IHFarmall 40A Mechanical	New HollandWorkmaster 40C


Engine Manufacturer	LS Mtron	LS Mtron
Engine Model	Not Published	Not Published
Engine Type	3-cylinder, turbocharged diesel, Tier 4 B/Final	3-cylinder, turbocharged diesel
No. of Cylinders	3	3
Displacement	114.7 in³	114.7 in³
Rated Engine Speed	2600 rpm	2600 rpm
Engine Power (Gross)	40 hp	40 hp
PTO Power	35.9 hp	Gear: 35.9 hp; HST: 34.8 hp
Engine Emissions Constraints	Tier 4	Tier 4B Final
Cooling System Type	Not Published	Liquid cooled
Air Cleaner	Not Published	Dual-element
Fuel System	Not Published	Common rail direct injection
Alternator	Not Published	70 A

Pump Type	Not Published	Dual pump (dedicated steering pump)
Implement Flow	8.4 gpm	8.4 gpm
Steering Flow	Not Published	4.9 gpm
Total Hydraulic Flow	13.3 gpm	13.3 gpm
Overall Hydraulic Pump Flow	Not Published	13.3 gpm
Hydraulic System Type	Open center	Not Published
Rear Remote Hydraulic Flow	Not Published	Not Published
No. of Standard Remote Valves	0	None
No. of Optional Remote Valves	3	Up to 3

Fuel Tank Capacity	12.6 gal	12.6 gal
Coolant Capacity	Not Published	Not Published
Crankcase Capacity	Not Published	Not Published
Transmission / Hydraulic System Capacity	Not Published	Not Published
Front Axle Fluid Capacity	Not Published	Not Published

PTO Type	Independent, electro-hydraulic engagement	Gear: transmission-driven with overrunning clutch; HST: independent, electrohydraulic wet clutch
PTO Rear	540 rpm	540 rpm
Mid-PTO Availability	Not Published	Not Published
Category, 3-Point Hitch	Category I	Category 1
Hitch Lift Capacity	Not Published	2,067 lb
Hitch Lift Capacity (at 24”)	1,596 lb	1,596 lb
Lift Control Type	Mechanical Draft Control (MDC)	Position control with drop-rate control

Transmission Type	12x12 mechanical shuttle with synchro shift (dry clutch) (standard)	Gear: 12x12 gear with synchronized shuttle; HST: 3-range hydrostatic with dual pedals
No. of Speeds	12 forward, 12 reverse	Gear: 12 forward / 12 reverse; HST: infinite (3 ranges)
Max Travel Speed (Forward)	14.2 mph	Gear: 14.3 mph; HST: 14.9 mph
Max Travel Speed (Reverse)	Not Published	Not Published
Clutch	Dry clutch	Not Published
Differential Lock & Limited Slip Options	Mechanical differential lock	Rear differential lock, mechanical (foot-engaged)

Frame Type	Not Published	Not Published
Steering	Not Published	Power steering (dedicated steering pump)
Brakes	Not Published	Wet, multi-disc
Seat Suspension & Adjustability	Adjustable suspension seat	Vinyl suspension seat, fore-and-aft adjustment on incline track, adjustable weight suspension; optional armrests
Front Axle Type	Mechanical Front Drive (MFD)	4WD front axle, mechanically engaged
Front Axle Rating	Not Published	Not Published
Drawbar Capacity	Not Published	Not Published

Overall Width	66.5 in	65.4 in (outside of rear tires, dished in)
Wheelbase	66.2 in	66 in
Ground Clearance	Not Published	12.7 in
Min. Turn Radius without Brakes	10.5 ft	123.2 in
Height to Top of ROPS	96.2 in	92.4 in
Height to Top of ROPS (folded)	74.2 in	74 in
Height to Top of Cab Model	Not Published	Not Published
Overall Length	119.4 in	133 in

Tractor Weight (Base)	3,053 lb	3,073 lb
Weight with ROPS and Loader	Not Published	4,142 lb
Weight with Cab and Loader	Not Published	Not Published

Tire Size & Options	R1 Agricultural, R3 Turf, or R4 Industrial	R1 Ag, R3 Turf, R3+ (R3/R4) Hybrid, R4 Industrial
R1 Agricultural - Front	7x14	Not Published
R1 Agricultural - Rear	11.2x24	Not Published
R3 Turf - Front	25x8.50-14	Not Published
R3 Turf - Rear	41x14.00-20	Not Published
R4 Industrial - Front	25x8.50-14	25x8.50-14
R4 Industrial - Rear	43x16.00-20	43x16-20

Quick Attach Loader System	Not Published	Skid steer quick attach
Loader Model	L340A	250LC
Loader Lift Height	98 in	250LC: 92 in
Loader Lift Capacity (Full Height)	890 lb at 31.5 in. forward of pivot pin	250LC: 1,344 lb (at bucket pivot pin, max height)
Loader Breakout Force	1,900 lb	250LC: 2,138 lb (at bucket pivot pin)

Warranty Length & Coverage	Basic 2 years; powertrain 4 additional years (6-year total)	Basic 24 months or 750 hours; powertrain 72 months or 1,500 hours

Find a Case IH dealer near you Find a New Holland dealer near you

Case IH Farmall 40A Mechanical vs New Holland Workmaster 40C: Quick Answers

Which has more horsepower, the Case IH Farmall 40A Mechanical or the New Holland Workmaster 40C?: They are effectively tied: both machines are rated at 40 hp hp for engine hp.
Which has more PTO horsepower, the Case IH Farmall 40A Mechanical or the New Holland Workmaster 40C?: They are effectively tied: both machines are rated at 35.9 hp hp for pto hp.
Which is heavier, the Case IH Farmall 40A Mechanical or the New Holland Workmaster 40C?: The New Holland Workmaster 40C leads on weight at 3,073 lb lb, compared to 3,053 lb lb for the Case IH Farmall 40A Mechanical.
Which has more loader lift capacity, the Case IH Farmall 40A Mechanical or the New Holland Workmaster 40C?: The New Holland Workmaster 40C leads on loader lift at 1,344 lb lb, compared to 890 lb lb for the Case IH Farmall 40A Mechanical.
Which has more three-point hitch lift capacity, the Case IH Farmall 40A Mechanical or the New Holland Workmaster 40C?: They are effectively tied: both machines are rated at 1,596 lb lb for 3-pt lift (24 in).

More Head-to-Heads

Case IH

Farmall 40A Mechanical

Farmall 40A Mechanical

Farmall 40A Mechanical

Farmall 40A Mechanical

Category Verdict

Spec	Case IH Farmall 40A Mechanical	New Holland Workmaster 40C
Engine HP (hp)	40 hp	40 hp
PTO HP (hp)	35.9 hp	35.9 hp
Weight (lb)	3,053 lb	▲ 3,073 lb
Loader Lift (lb)	890 lb	▲ 1,344 lb
3-Pt Lift (24 in) (lb)	1,596 lb	1,596 lb
Lift Height (in)	▲ 98 in	92 in
Breakout Force (lbf)	1,900 lbf	▲ 2,138 lbf
Hydraulic Flow (gpm)	13.3 gpm	13.3 gpm
Travel Speed (mph)	14.2 mph	▲ 14.9 mph

The headline numbers at a glance.

Case IH Farmall 40A MechanicalNew Holland Workmaster 40C

Engine HPhp

▲40 hp

PTO HPhp

▲35.9 hp

34.8 hp

GearHST

Weightlb

3,053 lb

▲3,073 lb

Loader Liftlb

890 lb

▲1,344 lb

3-Pt Lift (24 in)lb

▲1,596 lb

Share↓ Image 𝕏 f ✉

Full Spec Sheet

Every published spec, side by side, including the details the graphs above don't chart.

Spec	Case IHFarmall 40A Mechanical	New HollandWorkmaster 40C


Engine Manufacturer	LS Mtron	LS Mtron
Engine Model	Not Published	Not Published
Engine Type	3-cylinder, turbocharged diesel, Tier 4 B/Final	3-cylinder, turbocharged diesel
No. of Cylinders	3	3
Displacement	114.7 in³	114.7 in³
Rated Engine Speed	2600 rpm	2600 rpm
Engine Power (Gross)	40 hp	40 hp
PTO Power	35.9 hp	Gear: 35.9 hp; HST: 34.8 hp
Engine Emissions Constraints	Tier 4	Tier 4B Final
Cooling System Type	Not Published	Liquid cooled
Air Cleaner	Not Published	Dual-element
Fuel System	Not Published	Common rail direct injection
Alternator	Not Published	70 A

Pump Type	Not Published	Dual pump (dedicated steering pump)
Implement Flow	8.4 gpm	8.4 gpm
Steering Flow	Not Published	4.9 gpm
Total Hydraulic Flow	13.3 gpm	13.3 gpm
Overall Hydraulic Pump Flow	Not Published	13.3 gpm
Hydraulic System Type	Open center	Not Published
Rear Remote Hydraulic Flow	Not Published	Not Published
No. of Standard Remote Valves	0	None
No. of Optional Remote Valves	3	Up to 3

Fuel Tank Capacity	12.6 gal	12.6 gal
Coolant Capacity	Not Published	Not Published
Crankcase Capacity	Not Published	Not Published
Transmission / Hydraulic System Capacity	Not Published	Not Published
Front Axle Fluid Capacity	Not Published	Not Published

PTO Type	Independent, electro-hydraulic engagement	Gear: transmission-driven with overrunning clutch; HST: independent, electrohydraulic wet clutch
PTO Rear	540 rpm	540 rpm
Mid-PTO Availability	Not Published	Not Published
Category, 3-Point Hitch	Category I	Category 1
Hitch Lift Capacity	Not Published	2,067 lb
Hitch Lift Capacity (at 24”)	1,596 lb	1,596 lb
Lift Control Type	Mechanical Draft Control (MDC)	Position control with drop-rate control

Transmission Type	12x12 mechanical shuttle with synchro shift (dry clutch) (standard)	Gear: 12x12 gear with synchronized shuttle; HST: 3-range hydrostatic with dual pedals
No. of Speeds	12 forward, 12 reverse	Gear: 12 forward / 12 reverse; HST: infinite (3 ranges)
Max Travel Speed (Forward)	14.2 mph	Gear: 14.3 mph; HST: 14.9 mph
Max Travel Speed (Reverse)	Not Published	Not Published
Clutch	Dry clutch	Not Published
Differential Lock & Limited Slip Options	Mechanical differential lock	Rear differential lock, mechanical (foot-engaged)

Frame Type	Not Published	Not Published
Steering	Not Published	Power steering (dedicated steering pump)
Brakes	Not Published	Wet, multi-disc
Seat Suspension & Adjustability	Adjustable suspension seat	Vinyl suspension seat, fore-and-aft adjustment on incline track, adjustable weight suspension; optional armrests
Front Axle Type	Mechanical Front Drive (MFD)	4WD front axle, mechanically engaged
Front Axle Rating	Not Published	Not Published
Drawbar Capacity	Not Published	Not Published

Overall Width	66.5 in	65.4 in (outside of rear tires, dished in)
Wheelbase	66.2 in	66 in
Ground Clearance	Not Published	12.7 in
Min. Turn Radius without Brakes	10.5 ft	123.2 in
Height to Top of ROPS	96.2 in	92.4 in
Height to Top of ROPS (folded)	74.2 in	74 in
Height to Top of Cab Model	Not Published	Not Published
Overall Length	119.4 in	133 in

Tractor Weight (Base)	3,053 lb	3,073 lb
Weight with ROPS and Loader	Not Published	4,142 lb
Weight with Cab and Loader	Not Published	Not Published

Tire Size & Options	R1 Agricultural, R3 Turf, or R4 Industrial	R1 Ag, R3 Turf, R3+ (R3/R4) Hybrid, R4 Industrial
R1 Agricultural - Front	7x14	Not Published
R1 Agricultural - Rear	11.2x24	Not Published
R3 Turf - Front	25x8.50-14	Not Published
R3 Turf - Rear	41x14.00-20	Not Published
R4 Industrial - Front	25x8.50-14	25x8.50-14
R4 Industrial - Rear	43x16.00-20	43x16-20

Quick Attach Loader System	Not Published	Skid steer quick attach
Loader Model	L340A	250LC
Loader Lift Height	98 in	250LC: 92 in
Loader Lift Capacity (Full Height)	890 lb at 31.5 in. forward of pivot pin	250LC: 1,344 lb (at bucket pivot pin, max height)
Loader Breakout Force	1,900 lb	250LC: 2,138 lb (at bucket pivot pin)

Warranty Length & Coverage	Basic 2 years; powertrain 4 additional years (6-year total)	Basic 24 months or 750 hours; powertrain 72 months or 1,500 hours

Find a Case IH dealer near you Find a New Holland dealer near you

Case IH Farmall 40A Mechanical vs New Holland Workmaster 40C: Quick Answers

Which has more horsepower, the Case IH Farmall 40A Mechanical or the New Holland Workmaster 40C?

They are effectively tied: both machines are rated at 40 hp hp for engine hp.

Which has more PTO horsepower, the Case IH Farmall 40A Mechanical or the New Holland Workmaster 40C?

They are effectively tied: both machines are rated at 35.9 hp hp for pto hp.

Which is heavier, the Case IH Farmall 40A Mechanical or the New Holland Workmaster 40C?

The New Holland Workmaster 40C leads on weight at 3,073 lb lb, compared to 3,053 lb lb for the Case IH Farmall 40A Mechanical.

Which has more loader lift capacity, the Case IH Farmall 40A Mechanical or the New Holland Workmaster 40C?

The New Holland Workmaster 40C leads on loader lift at 1,344 lb lb, compared to 890 lb lb for the Case IH Farmall 40A Mechanical.

Which has more three-point hitch lift capacity, the Case IH Farmall 40A Mechanical or the New Holland Workmaster 40C?

They are effectively tied: both machines are rated at 1,596 lb lb for 3-pt lift (24 in).

Case IH Farmall 40A Mechanical vs New Holland Workmaster 40C

Category Verdict

Full Spec Sheet

Case IH Farmall 40A Mechanical vs New Holland Workmaster 40C: Quick Answers

More Head-to-Heads

More in the resource center

Look up a tractor

Side-by-side comparison

The Netflix of tractor videos

Tractor guides and articles

Case IH Farmall 40A Mechanical vs New Holland Workmaster 40C

Category Verdict

Full Spec Sheet

Case IH Farmall 40A Mechanical vs New Holland Workmaster 40C: Quick Answers

More Head-to-Heads