Case IH Farmall 40C Gear vs New Holland Workmaster 40C

Every published spec for both machines, side by side. The verdict below is computed straight from the spec sheets, not opinion.

Across 9 measurable specs, the Case IH Farmall 40C Gear leads 5 categories to 3 (1 tied). Machine pages: Case IH Farmall 40C Gear and New Holland Workmaster 40C.

Want a third or fourth machine in the mix? Open this matchup in the comparison tool and add up to two more.

Category Verdict

Spec	Case IH Farmall 40C Gear	New Holland Workmaster 40C
Engine HP (hp)	40 hp	40 hp
PTO HP (hp)	34 hp	▲ 35.9 hp
Weight (lb)	▲ 3,803 lb	3,073 lb
Loader Lift (lb)	▲ 1,540 lb	1,344 lb
3-Pt Lift (24 in) (lb)	▲ 1,808 lb	1,596 lb
Lift Height (in)	▲ 105 in	92 in
Breakout Force (lbf)	▲ 2,640 lbf	2,138 lbf
Hydraulic Flow (gpm)	12.4 gpm	▲ 13.3 gpm
Travel Speed (mph)	14.2 mph	▲ 14.9 mph

The headline numbers at a glance.

Case IH Farmall 40C GearNew Holland Workmaster 40C

Engine HPhp

▲40 hp

PTO HPhp

34 hp

▲35.9 hp

34.8 hp

GearHST

Weightlb

▲3,803 lb

3,073 lb

Loader Liftlb

▲1,540 lb

1,344 lb

3-Pt Lift (24 in)lb

▲1,808 lb

1,596 lb

Share↓ Image 𝕏 f ✉

Full Spec Sheet

Every published spec, side by side, including the details the graphs above don't chart.

Spec	Case IHFarmall 40C Gear	New HollandWorkmaster 40C


Engine Manufacturer	LS Mtron	LS Mtron
Engine Model	L3C19-T4	Not Published
Engine Type	Not Published	3-cylinder, turbocharged diesel
No. of Cylinders	3	3
Displacement	115.9 in³	114.7 in³
Rated Engine Speed	2600 rpm	2600 rpm
Engine Power (Gross)	40 hp	40 hp
PTO Power	34 hp	Gear: 35.9 hp; HST: 34.8 hp
Engine Emissions Constraints	Tier 4	Tier 4B Final
Cooling System Type	Not Published	Liquid cooled
Air Cleaner	Replaceable dry element	Dual-element
Fuel System	Not Published	Common rail direct injection
Alternator	70 A	70 A

Pump Type	Not Published	Dual pump (dedicated steering pump)
Implement Flow	8.2 gpm	8.4 gpm
Steering Flow	4.2 gpm	4.9 gpm
Total Hydraulic Flow	12.4 gpm (8.2 + 4.2, computed)	13.3 gpm
Overall Hydraulic Pump Flow	Not Published	13.3 gpm
Hydraulic System Type	Open center	Not Published
Rear Remote Hydraulic Flow	Not Published	Not Published
No. of Standard Remote Valves	2	None
No. of Optional Remote Valves	Not Published	Up to 3

Fuel Tank Capacity	12.4 gal	12.6 gal
Coolant Capacity	Not Published	Not Published
Crankcase Capacity	Not Published	Not Published
Transmission / Hydraulic System Capacity	Not Published	Not Published
Front Axle Fluid Capacity	Not Published	Not Published

PTO Type	Independent rear PTO, electro-hydraulic engagement	Gear: transmission-driven with overrunning clutch; HST: independent, electrohydraulic wet clutch
PTO Rear	540 rpm	540 rpm
Mid-PTO Availability	Optional, 2000 rpm	Not Published
Category, 3-Point Hitch	Category I	Category 1
Hitch Lift Capacity	Not Published	2,067 lb
Hitch Lift Capacity (at 24”)	1,808 lb	1,596 lb
Lift Control Type	Mechanical draft control (MDC)	Position control with drop-rate control

Transmission Type	12 x 12 mechanical shuttle with synchro shift	Gear: 12x12 gear with synchronized shuttle; HST: 3-range hydrostatic with dual pedals
No. of Speeds	12 forward, 12 reverse	Gear: 12 forward / 12 reverse; HST: infinite (3 ranges)
Max Travel Speed (Forward)	14.2 mph	Gear: 14.3 mph; HST: 14.9 mph
Max Travel Speed (Reverse)	Not Published	Not Published
Clutch	dry clutch	Not Published
Differential Lock & Limited Slip Options	Mechanical differential lock	Rear differential lock, mechanical (foot-engaged)

Frame Type	Not Published	Not Published
Steering	Power steering	Power steering (dedicated steering pump)
Brakes	Wet multi-disc	Wet, multi-disc
Seat Suspension & Adjustability	Deluxe seat with armrests and an adjustable backrest	Vinyl suspension seat, fore-and-aft adjustment on incline track, adjustable weight suspension; optional armrests
Front Axle Type	Mechanical Front Drive (MFD)	4WD front axle, mechanically engaged
Front Axle Rating	Not Published	Not Published
Drawbar Capacity	Not Published	Not Published

Overall Width	66.4 in	65.4 in (outside of rear tires, dished in)
Wheelbase	66 in	66 in
Ground Clearance	Not Published	12.7 in
Min. Turn Radius without Brakes	Not Published	123.2 in
Height to Top of ROPS	Not Published	92.4 in
Height to Top of ROPS (folded)	Not Published	74 in
Height to Top of Cab Model	93.3 in	Not Published
Overall Length	128.1 in	133 in

Tractor Weight (Base)	3,803 lb	3,073 lb
Weight with ROPS and Loader	Not Published	4,142 lb
Weight with Cab and Loader	Not Published	Not Published

Tire Size & Options	R1 Agricultural; R3 Turf; R4 Industrial	R1 Ag, R3 Turf, R3+ (R3/R4) Hybrid, R4 Industrial
R1 Agricultural - Front	Not Published	Not Published
R1 Agricultural - Rear	Not Published	Not Published
R3 Turf - Front	Not Published	Not Published
R3 Turf - Rear	Not Published	Not Published
R4 Industrial - Front	Not Published	25x8.50-14
R4 Industrial - Rear	Not Published	43x16-20

Quick Attach Loader System	Quick-Attach faceplate; mid-mount frame for fast loader connect and disconnect (L350A)	Skid steer quick attach
Loader Model	L350A	250LC
Loader Lift Height	105 in	250LC: 92 in
Loader Lift Capacity (Full Height)	1,540 lb at 31.5 in. forward of pivot pin	250LC: 1,344 lb (at bucket pivot pin, max height)
Loader Breakout Force	2,640 lbf	250LC: 2,138 lb (at bucket pivot pin)

Warranty Length & Coverage	Basic 2 years; powertrain 4 additional years (6-year, 72-month total)	Basic 24 months or 750 hours; powertrain 72 months or 1,500 hours

Find a Case IH dealer near you Find a New Holland dealer near you

Case IH Farmall 40C Gear vs New Holland Workmaster 40C: Quick Answers

Which has more horsepower, the Case IH Farmall 40C Gear or the New Holland Workmaster 40C?: They are effectively tied: both machines are rated at 40 hp hp for engine hp.
Which has more PTO horsepower, the Case IH Farmall 40C Gear or the New Holland Workmaster 40C?: The New Holland Workmaster 40C leads on pto hp at 35.9 hp hp, compared to 34 hp hp for the Case IH Farmall 40C Gear.
Which is heavier, the Case IH Farmall 40C Gear or the New Holland Workmaster 40C?: The Case IH Farmall 40C Gear leads on weight at 3,803 lb lb, compared to 3,073 lb lb for the New Holland Workmaster 40C.
Which has more loader lift capacity, the Case IH Farmall 40C Gear or the New Holland Workmaster 40C?: The Case IH Farmall 40C Gear leads on loader lift at 1,540 lb lb, compared to 1,344 lb lb for the New Holland Workmaster 40C.
Which has more three-point hitch lift capacity, the Case IH Farmall 40C Gear or the New Holland Workmaster 40C?: The Case IH Farmall 40C Gear leads on 3-pt lift (24 in) at 1,808 lb lb, compared to 1,596 lb lb for the New Holland Workmaster 40C.

More Head-to-Heads

Category Verdict

Spec	Case IH Farmall 40C Gear	New Holland Workmaster 40C
Engine HP (hp)	40 hp	40 hp
PTO HP (hp)	34 hp	▲ 35.9 hp
Weight (lb)	▲ 3,803 lb	3,073 lb
Loader Lift (lb)	▲ 1,540 lb	1,344 lb
3-Pt Lift (24 in) (lb)	▲ 1,808 lb	1,596 lb
Lift Height (in)	▲ 105 in	92 in
Breakout Force (lbf)	▲ 2,640 lbf	2,138 lbf
Hydraulic Flow (gpm)	12.4 gpm	▲ 13.3 gpm
Travel Speed (mph)	14.2 mph	▲ 14.9 mph

The headline numbers at a glance.

Case IH Farmall 40C GearNew Holland Workmaster 40C

Engine HPhp

▲40 hp

PTO HPhp

34 hp

▲35.9 hp

34.8 hp

GearHST

Weightlb

▲3,803 lb

3,073 lb

Loader Liftlb

▲1,540 lb

1,344 lb

3-Pt Lift (24 in)lb

▲1,808 lb

1,596 lb

Share↓ Image 𝕏 f ✉

Full Spec Sheet

Every published spec, side by side, including the details the graphs above don't chart.

Spec	Case IHFarmall 40C Gear	New HollandWorkmaster 40C


Engine Manufacturer	LS Mtron	LS Mtron
Engine Model	L3C19-T4	Not Published
Engine Type	Not Published	3-cylinder, turbocharged diesel
No. of Cylinders	3	3
Displacement	115.9 in³	114.7 in³
Rated Engine Speed	2600 rpm	2600 rpm
Engine Power (Gross)	40 hp	40 hp
PTO Power	34 hp	Gear: 35.9 hp; HST: 34.8 hp
Engine Emissions Constraints	Tier 4	Tier 4B Final
Cooling System Type	Not Published	Liquid cooled
Air Cleaner	Replaceable dry element	Dual-element
Fuel System	Not Published	Common rail direct injection
Alternator	70 A	70 A

Pump Type	Not Published	Dual pump (dedicated steering pump)
Implement Flow	8.2 gpm	8.4 gpm
Steering Flow	4.2 gpm	4.9 gpm
Total Hydraulic Flow	12.4 gpm (8.2 + 4.2, computed)	13.3 gpm
Overall Hydraulic Pump Flow	Not Published	13.3 gpm
Hydraulic System Type	Open center	Not Published
Rear Remote Hydraulic Flow	Not Published	Not Published
No. of Standard Remote Valves	2	None
No. of Optional Remote Valves	Not Published	Up to 3

Fuel Tank Capacity	12.4 gal	12.6 gal
Coolant Capacity	Not Published	Not Published
Crankcase Capacity	Not Published	Not Published
Transmission / Hydraulic System Capacity	Not Published	Not Published
Front Axle Fluid Capacity	Not Published	Not Published

PTO Type	Independent rear PTO, electro-hydraulic engagement	Gear: transmission-driven with overrunning clutch; HST: independent, electrohydraulic wet clutch
PTO Rear	540 rpm	540 rpm
Mid-PTO Availability	Optional, 2000 rpm	Not Published
Category, 3-Point Hitch	Category I	Category 1
Hitch Lift Capacity	Not Published	2,067 lb
Hitch Lift Capacity (at 24”)	1,808 lb	1,596 lb
Lift Control Type	Mechanical draft control (MDC)	Position control with drop-rate control

Transmission Type	12 x 12 mechanical shuttle with synchro shift	Gear: 12x12 gear with synchronized shuttle; HST: 3-range hydrostatic with dual pedals
No. of Speeds	12 forward, 12 reverse	Gear: 12 forward / 12 reverse; HST: infinite (3 ranges)
Max Travel Speed (Forward)	14.2 mph	Gear: 14.3 mph; HST: 14.9 mph
Max Travel Speed (Reverse)	Not Published	Not Published
Clutch	dry clutch	Not Published
Differential Lock & Limited Slip Options	Mechanical differential lock	Rear differential lock, mechanical (foot-engaged)

Frame Type	Not Published	Not Published
Steering	Power steering	Power steering (dedicated steering pump)
Brakes	Wet multi-disc	Wet, multi-disc
Seat Suspension & Adjustability	Deluxe seat with armrests and an adjustable backrest	Vinyl suspension seat, fore-and-aft adjustment on incline track, adjustable weight suspension; optional armrests
Front Axle Type	Mechanical Front Drive (MFD)	4WD front axle, mechanically engaged
Front Axle Rating	Not Published	Not Published
Drawbar Capacity	Not Published	Not Published

Overall Width	66.4 in	65.4 in (outside of rear tires, dished in)
Wheelbase	66 in	66 in
Ground Clearance	Not Published	12.7 in
Min. Turn Radius without Brakes	Not Published	123.2 in
Height to Top of ROPS	Not Published	92.4 in
Height to Top of ROPS (folded)	Not Published	74 in
Height to Top of Cab Model	93.3 in	Not Published
Overall Length	128.1 in	133 in

Tractor Weight (Base)	3,803 lb	3,073 lb
Weight with ROPS and Loader	Not Published	4,142 lb
Weight with Cab and Loader	Not Published	Not Published

Tire Size & Options	R1 Agricultural; R3 Turf; R4 Industrial	R1 Ag, R3 Turf, R3+ (R3/R4) Hybrid, R4 Industrial
R1 Agricultural - Front	Not Published	Not Published
R1 Agricultural - Rear	Not Published	Not Published
R3 Turf - Front	Not Published	Not Published
R3 Turf - Rear	Not Published	Not Published
R4 Industrial - Front	Not Published	25x8.50-14
R4 Industrial - Rear	Not Published	43x16-20

Quick Attach Loader System	Quick-Attach faceplate; mid-mount frame for fast loader connect and disconnect (L350A)	Skid steer quick attach
Loader Model	L350A	250LC
Loader Lift Height	105 in	250LC: 92 in
Loader Lift Capacity (Full Height)	1,540 lb at 31.5 in. forward of pivot pin	250LC: 1,344 lb (at bucket pivot pin, max height)
Loader Breakout Force	2,640 lbf	250LC: 2,138 lb (at bucket pivot pin)

Warranty Length & Coverage	Basic 2 years; powertrain 4 additional years (6-year, 72-month total)	Basic 24 months or 750 hours; powertrain 72 months or 1,500 hours

Find a Case IH dealer near you Find a New Holland dealer near you

Case IH Farmall 40C Gear vs New Holland Workmaster 40C: Quick Answers

Which has more horsepower, the Case IH Farmall 40C Gear or the New Holland Workmaster 40C?

They are effectively tied: both machines are rated at 40 hp hp for engine hp.

Which has more PTO horsepower, the Case IH Farmall 40C Gear or the New Holland Workmaster 40C?

The New Holland Workmaster 40C leads on pto hp at 35.9 hp hp, compared to 34 hp hp for the Case IH Farmall 40C Gear.

Which is heavier, the Case IH Farmall 40C Gear or the New Holland Workmaster 40C?

The Case IH Farmall 40C Gear leads on weight at 3,803 lb lb, compared to 3,073 lb lb for the New Holland Workmaster 40C.

Which has more loader lift capacity, the Case IH Farmall 40C Gear or the New Holland Workmaster 40C?

The Case IH Farmall 40C Gear leads on loader lift at 1,540 lb lb, compared to 1,344 lb lb for the New Holland Workmaster 40C.

Which has more three-point hitch lift capacity, the Case IH Farmall 40C Gear or the New Holland Workmaster 40C?

The Case IH Farmall 40C Gear leads on 3-pt lift (24 in) at 1,808 lb lb, compared to 1,596 lb lb for the New Holland Workmaster 40C.

Case IH Farmall 40C Gear vs New Holland Workmaster 40C

Category Verdict

Full Spec Sheet

Case IH Farmall 40C Gear vs New Holland Workmaster 40C: Quick Answers

More Head-to-Heads

More in the resource center

Look up a tractor

Side-by-side comparison

The Netflix of tractor videos

Tractor guides and articles

Case IH Farmall 40C Gear vs New Holland Workmaster 40C

Category Verdict

Full Spec Sheet

Case IH Farmall 40C Gear vs New Holland Workmaster 40C: Quick Answers

More Head-to-Heads