John Deere 2210 vs Kubota BX2680

Across 9 measurable specs, the Kubota BX2680 leads 6 categories to 2 (1 tied). Machine pages: John Deere 2210 and Kubota BX2680.

Want a third or fourth machine in the mix? Open this matchup in the comparison tool and add up to two more.

Category Verdict

Full Spec Sheet

Every published spec, side by side, including the details the graphs above don't chart.

Spec	John Deere2210	KubotaBX2680

▶Engine
Engine Manufacturer	Yanmar	Kubota
Engine Model	3TNE74	D1005
Engine Type	3-cylinder liquid-cooled diesel, indirect injection	Liquid cooled, 4-cycle, diesel
No. of Cylinders	3	3
Displacement	61.4 in³	61.1 in³
Rated Engine Speed	3000 rpm	3200 rpm
Engine Power (Gross)	23 hp	23.3 hp
PTO Power	17.7 hp	19.2 hp
Engine Emissions Constraints	Not Published	Not Published
Cooling System Type	Liquid-cooled	Water with pressurized radiator, reverse air-flow design
Air Cleaner	Dry type with safety element	Dry element
Fuel System	Indirect injection, in-line fuel pump with solenoid shutoff	Direct injection
Alternator	20 A	40 A, 12 V
▶Hydraulics
Pump Type	Not Published	Open center tandem pump gear type
Implement Flow	3 gpm	5.2 gpm
Steering Flow	2.5 gpm	1.0 gpm
Total Hydraulic Flow	5.5 gpm	6.2 gpm
Overall Hydraulic Pump Flow	5.5 gpm	6.2 gpm
Hydraulic System Type	Not Published	Open center
Rear Remote Hydraulic Flow	Not Published	Not Published
No. of Standard Remote Valves	Not Published	0 standard (2-valve rear remote coupler optional)
No. of Optional Remote Valves	Not Published	2 (optional; ISO 7241-1 series A or B)
▶Fluid Capacity
Fuel Tank Capacity	5.0 gal	6.6 gal
Coolant Capacity	3.2 qt	3.5 qt
Crankcase Capacity	2.2 qt	4.2 qt
Transmission / Hydraulic System Capacity	3.4 gal	3.0 gal
Front Axle Fluid Capacity	2.6 qt	3.8 qt
▶PTO & Hitch
PTO Type	Independent, wet disk clutch	Live independent PTO (with hydraulic clutch)
PTO Rear	540 rpm	STD (540 rpm)
Mid-PTO Availability	Standard, 2100 rpm	STD (2500 rpm)
Category, 3-Point Hitch	Category 1	SAE Category I Optional
Hitch Lift Capacity	Not Published	1,213 lb
Hitch Lift Capacity (at 24”)	701 lb	680 lb
Lift Control Type	Not Published	Quarter-inching valve
▶Transmission & Drivetrain
Transmission Type	2-range hydrostatic	Hydrostatic transmission
No. of Speeds	Infinite forward and reverse, 2 ranges	2 Range (Low-High)
Max Travel Speed (Forward)	8.4 mph	8.4 mph
Max Travel Speed (Reverse)	6.3 mph	6.5 mph
Clutch	Not Published	Dry type single plate - Main clutch 9.45 in.
Differential Lock & Limited Slip Options	Not Published	Rear differential lock standard
▶Chassis, Steering & Controls
Frame Type	Two-post fixed ROPS; four-wheel drive	Two-post foldable ROPS
Steering	Power steering	Integral power steering
Brakes	Wet disk	Mechanical, wet disc type
Seat Suspension & Adjustability	Not Published	High-back deluxe seat with armrests; fore/aft slide and backrest tilt adjustment
Front Axle Type	Mechanical front wheel drive (MFWD), standard, all ranges, engages on the go	4WD: Bevel gear front axle, non-adjustable tread spacing
Front Axle Rating	3120 lb	Not Published
Drawbar Capacity	562 lb	Max. drawbar load @ hitch: 550 lb.
▶Dimensions & Maneuverability
Overall Length with 3-Point Hitch	104.3 in	95.5 in (without 3-point hitch)
Overall Width	47.2 in	45.1 in
Wheelbase	57.1 in	55.1 in
Ground Clearance	7.7 in (front axle)	6.5 in (minimum; 8.9 in at front axle)
Min. Turn Radius without Brakes	88.6 in (MFWD off)	7.5 ft
Height to Top of ROPS	77.6 in	83.1 in
Height to Top of ROPS (folded)	Not Published	Not Published
Height to Top of Cab Model	Not Published	Not Published
▶Weight
Tractor Weight (Base)	1400 lb	1521 lb
Weight with ROPS and Loader	Not Published	Not Published
Weight with Cab and Loader	Not Published	Not Published
▶Tire Options
Tire Size & Options	18x8.5-10 front and 26x12.00-12 rear; R1 standard, R3 optional	R1 Agricultural, R3 Turf, R4 Industrial
R1 Agricultural - Front	18x8.5-10	18X8.5-10
R1 Agricultural - Rear	26x12.00-12	26X12-12
R3 Turf - Front	18x8.5-10	18X8.5-10
R3 Turf - Rear	26x12.00-12	26X12-12
R4 Industrial - Front	18x8.50-10	18X8.5-10
R4 Industrial - Rear	26x12.00-12	26X12-12
▶Loader & Attachments
Quick Attach Loader System	Not Published	Swift-Tach Loader (LA344S - Two Lever Quick Attach Bucket)
Loader Model	210	LA344S (standard, quick attach); LA344 (pin-on option)
Loader Lift Height	210: 68.5 in	71.0 in
Loader Lift Capacity (Full Height)	210: 622 lb (to max height at pivot point)	739 lb (LA344 pin-on); 613 lb (LA344S quick attach)
Loader Breakout Force	210: 1577 lbf (at pivot point)	1,407 lbf (LA344 pin-on); 1,286 lbf (LA344S quick attach)
▶Warranty
Warranty Length & Coverage	Not Published	Non-Commercial Home & Residential Use - Basic Standard Limited: 24 months or 1500 hours; Limited Powertrain: 72 months or 2000 hours. Commercial Use - Basic Standard Limited: 24 months or 1500 hours; Limited Powertrain: 36 months or 2000 hours.
▶ITC Company Accessories
Accessories that fit	None tagged yet	Kubota BX80 Series Brush Guard Insert (S/N C1630 and up) $259.00 S/N C1630 and after Kubota BX80 Series Brush Guard Insert (S/N before C1630) $299.00 S/N before C1630

Find a John Deere dealer near you→Find a Kubota dealer near you→

John Deere 2210 vs Kubota BX2680: Quick Answers

Which has more horsepower, the John Deere 2210 or the Kubota BX2680?

The Kubota BX2680 leads on engine hp at 23.3 hp hp, compared to 23 hp hp for the John Deere 2210.

Which has more PTO horsepower, the John Deere 2210 or the Kubota BX2680?

The Kubota BX2680 leads on pto hp at 19.2 hp hp, compared to 17.7 hp hp for the John Deere 2210.

Which is heavier, the John Deere 2210 or the Kubota BX2680?

The Kubota BX2680 leads on weight at 1,521 lb lb, compared to 1,400 lb lb for the John Deere 2210.

Which has more loader lift capacity, the John Deere 2210 or the Kubota BX2680?

The Kubota BX2680 leads on loader lift at 739 lb lb, compared to 622 lb lb for the John Deere 2210.

Which has more three-point hitch lift capacity, the John Deere 2210 or the Kubota BX2680?

The John Deere 2210 leads on 3-pt lift (24 in) at 701 lb lb, compared to 680 lb lb for the Kubota BX2680.

More Head-to-Heads