Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →An owner walking through the actual removal of a 54-inch quick-hitch snowblower from a John Deere 2320, step by step: depressurizing hydraulic lines, capping fittings, releasing the mounting hooks, dropping and storing the PTO driveshaft, and pulling the pins. He clocks the job at about ten minutes and adds a practical reminder to grease fittings before storage. Most useful for 2320 owners tackling this for the first time.
Depressurize the hydraulic lines, pop off and cap the fittings, release the mounting hooks on both sides, drop the PTO driveshaft into its harness, then pull the pins so the snowblower drops down.
About ten minutes total, according to the owner performing the removal.
Grease the fittings, including one on the hydraulic side, since people often forget to do this before storage.