Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A long-term owner walkaround covering 13 years and 724 hours with a John Deere 2320 compact tractor-loader-backhoe. The real value is the candid rundown of specific failures: the four-wheel-drive spindle repair requiring a transmission split, leaking hydraulic quick-connect O-rings, a front wheel seal, and non-greaseable driveshaft U-joints plus the DIY fix. Useful for anyone considering a used 2320 and wanting to know exactly what to inspect before buying.
The factory U-joints have no grease fitting, so they wear out and the shaft can break at operating RPM, risking engine or transmission damage. The owner replaced them with greasable U-joints as a fix.
The O-ring inside the quick-connect fails over time. There is no John Deere part number for it, so the owner found replacing the whole unit, around thirty dollars, lasts longer than aftermarket O-rings.
The front-drive spindle at the bottom of the transmission broke while digging out honeysuckle bushes, requiring John Deere to split the transmission apart to replace it.
Check the drive shaft connecting the engine to the transmission and the U-joints to see if they have been upgraded to a greasable modification, since factory ones are not greaseable.