Case IH Farmall 25A vs New Holland Workmaster 25

Every published spec for both machines, side by side. The verdict below is computed straight from the spec sheets, not opinion.

Across 8 measurable specs, the New Holland Workmaster 25 leads 4 categories to 0 (4 tied). Machine pages: Case IH Farmall 25A and New Holland Workmaster 25.

Want a third or fourth machine in the mix? Open this matchup in the comparison tool and add up to two more.

Category Verdict

Spec	Case IH Farmall 25A	New Holland Workmaster 25
Engine HP (hp)	24.4 hp	24.4 hp
PTO HP (hp)	17.1 hp	▲ 19.2 hp
Weight (lb)	2,469 lb	2,469 lb
Loader Lift (lb)	1,214 lb	▲ 1,600 lb
3-Pt Lift (24 in) (lb)	1,433 lb	1,433 lb
Lift Height (in)	94.3 in	94.3 in
Breakout Force (lbf)	1,926 lbf	▲ 2,637 lbf
Hydraulic Flow (gpm)	7.9 gpm	▲ 12.5 gpm
Travel Speed (mph)	n/a	15.3 mph

The headline numbers at a glance.

Case IH Farmall 25ANew Holland Workmaster 25

Engine HPhp

▲24.4 hp

PTO HPhp

17.1 hp

▲19.2 hp

17.1 hp

GearHST

Weightlb

▲2,469 lb

2,434 lb

▲2,469 lb

GearHST

Loader Liftlb

1,214 lb

▲1,600 lb

3-Pt Lift (24 in)lb

▲1,433 lb

Share↓ Image 𝕏 f ✉

Full Spec Sheet

Every published spec, side by side, including the details the graphs above don't chart.

Spec	Case IHFarmall 25A	New HollandWorkmaster 25


Engine Manufacturer	Mitsubishi	Mitsubishi
Engine Model	Not Published	S3L2-W461GT
Engine Type	3-cylinder, turbocharged & aftercooled, Tier 4 B/Final	3-cylinder, naturally aspirated, liquid-cooled diesel
No. of Cylinders	3	3
Displacement	80.4 in³	80.4 in³
Rated Engine Speed	2500 rpm	2500 rpm
Engine Power (Gross)	24.4 hp	24.4 hp
PTO Power	17.1 hp	Gear: 19.2 hp; HST: 17.1 hp
Engine Emissions Constraints	Tier 4	Tier 4B (final)
Cooling System Type	Liquid-cooled	Pressurized liquid with recirculating bypass
Air Cleaner	Not Published	Dual element air cleaner (outer and inner element)
Fuel System	Not Published	In-line injection pump
Alternator	Not Published	50 A, 12 V

Pump Type	Not Published	Mechanical
Implement Flow	7.9 gpm	7.9 gpm
Steering Flow	Not Published	4.6 gpm
Total Hydraulic Flow	Not Published	12.5 gpm
Overall Hydraulic Pump Flow	Not Published	12.5 gpm
Hydraulic System Type	Open center	Open center
Rear Remote Hydraulic Flow	Not Published	Not Published
No. of Standard Remote Valves	0	Not Published
No. of Optional Remote Valves	1	1 or 2

Fuel Tank Capacity	7.4 gal	7.4 gal
Coolant Capacity	Not Published	1.3 gal
Crankcase Capacity	Not Published	4.4 qt
Transmission / Hydraulic System Capacity	Not Published	8.5 gal
Front Axle Fluid Capacity	Not Published	6.9 qt

PTO Type	Independent	Independent, electro-hydraulic engagement
PTO Rear	540 rpm	540 rpm
Mid-PTO Availability	Optional, 2,000 rpm	HST: Standard; Gear: Optional (2,000 rpm)
Category, 3-Point Hitch	Category I	Category I
Hitch Lift Capacity	Not Published	1,808 lb
Hitch Lift Capacity (at 24”)	1,433 lb	1,433 lb
Lift Control Type	Not Published	Position control

Transmission Type	Hydrostatic (optional)	Gear: 12x12 synchronized shuttle; HST: 3-range hydrostatic, dual pedal
No. of Speeds	Infinite (hydrostatic)	Gear: 12F/12R; HST: 3-range
Max Travel Speed (Forward)	Not Published	HST: 15.3 mph; Gear: 13.8 mph
Max Travel Speed (Reverse)	Not Published	Gear: 13.10 mph; HST: 10.79 mph
Clutch	Not Published	Gear: 9.4 in disc; HST: Not applicable
Differential Lock & Limited Slip Options	Mechanical differential lock	Mechanical rear differential lock

Frame Type	Not Published	Not Published
Steering	Power steering	Power steering
Brakes	Not Published	Wet disc
Seat Suspension & Adjustability	Not Published	Not Published
Front Axle Type	Mechanical Front Drive (MFD)	4WD
Front Axle Rating	Not Published	Not Published
Drawbar Capacity	Not Published	Not Published

Overall Width	Not Published	54.1 in
Wheelbase	65.9 in	65.9 in
Ground Clearance	Not Published	13 in
Min. Turn Radius without Brakes	Not Published	120 in (left turn); 129.8 in (right turn)
Height to Top of ROPS	88.2 in	88.2 in
Height to Top of ROPS (folded)	68.2 in	68.2 in
Height to Top of Cab Model	Not Published	Not Published
Overall Length	117.2 in	117.2 in

Tractor Weight (Base)	2,469 lb	Gear: 2,434 lb; HST: 2,469 lb
Weight with ROPS and Loader	Not Published	Not Published
Weight with Cab and Loader	Not Published	Not Published

Tire Size & Options	Not Published	R1 Agricultural, R3 Turf, R4 Industrial
R1 Agricultural - Front	Not Published	7-14
R1 Agricultural - Rear	Not Published	11.2-24
R3 Turf - Front	Not Published	25x8.50-14
R3 Turf - Rear	Not Published	41x14.00-20
R4 Industrial - Front	Not Published	25x8.50-14
R4 Industrial - Rear	Not Published	43x16-20

Quick Attach Loader System	Not Published	200LC: tool-free quick-mount system; optional skid-steer quick-attach plates
Loader Model	L330	200LC
Loader Lift Height	94.3 in	200LC: 94.3 in (at pivot pin)
Loader Lift Capacity (Full Height)	1,214 lb	200LC: 1,600 lb (at bucket pivot pin, max height)
Loader Breakout Force	1,926 lb	200LC: 2,637 lb (at bucket pivot pin)

Warranty Length & Coverage	Basic 2 years; powertrain 4 additional years (6-year total)	Basic 2 years or 750 hours; powertrain to 6 years or 1,500 hours total

Find a Case IH dealer near you Find a New Holland dealer near you

Case IH Farmall 25A vs New Holland Workmaster 25: Quick Answers

Which has more horsepower, the Case IH Farmall 25A or the New Holland Workmaster 25?: They are effectively tied: both machines are rated at 24.4 hp hp for engine hp.
Which has more PTO horsepower, the Case IH Farmall 25A or the New Holland Workmaster 25?: The New Holland Workmaster 25 leads on pto hp at 19.2 hp hp, compared to 17.1 hp hp for the Case IH Farmall 25A.
Which is heavier, the Case IH Farmall 25A or the New Holland Workmaster 25?: They are effectively tied: both machines are rated at 2,469 lb lb for weight.
Which has more loader lift capacity, the Case IH Farmall 25A or the New Holland Workmaster 25?: The New Holland Workmaster 25 leads on loader lift at 1,600 lb lb, compared to 1,214 lb lb for the Case IH Farmall 25A.
Which has more three-point hitch lift capacity, the Case IH Farmall 25A or the New Holland Workmaster 25?: They are effectively tied: both machines are rated at 1,433 lb lb for 3-pt lift (24 in).

More Head-to-Heads

Category Verdict

Spec	Case IH Farmall 25A	New Holland Workmaster 25
Engine HP (hp)	24.4 hp	24.4 hp
PTO HP (hp)	17.1 hp	▲ 19.2 hp
Weight (lb)	2,469 lb	2,469 lb
Loader Lift (lb)	1,214 lb	▲ 1,600 lb
3-Pt Lift (24 in) (lb)	1,433 lb	1,433 lb
Lift Height (in)	94.3 in	94.3 in
Breakout Force (lbf)	1,926 lbf	▲ 2,637 lbf
Hydraulic Flow (gpm)	7.9 gpm	▲ 12.5 gpm
Travel Speed (mph)	n/a	15.3 mph

The headline numbers at a glance.

Case IH Farmall 25ANew Holland Workmaster 25

Engine HPhp

▲24.4 hp

PTO HPhp

17.1 hp

▲19.2 hp

17.1 hp

GearHST

Weightlb

▲2,469 lb

2,434 lb

▲2,469 lb

GearHST

Loader Liftlb

1,214 lb

▲1,600 lb

3-Pt Lift (24 in)lb

▲1,433 lb

Share↓ Image 𝕏 f ✉

Full Spec Sheet

Every published spec, side by side, including the details the graphs above don't chart.

Spec	Case IHFarmall 25A	New HollandWorkmaster 25


Engine Manufacturer	Mitsubishi	Mitsubishi
Engine Model	Not Published	S3L2-W461GT
Engine Type	3-cylinder, turbocharged & aftercooled, Tier 4 B/Final	3-cylinder, naturally aspirated, liquid-cooled diesel
No. of Cylinders	3	3
Displacement	80.4 in³	80.4 in³
Rated Engine Speed	2500 rpm	2500 rpm
Engine Power (Gross)	24.4 hp	24.4 hp
PTO Power	17.1 hp	Gear: 19.2 hp; HST: 17.1 hp
Engine Emissions Constraints	Tier 4	Tier 4B (final)
Cooling System Type	Liquid-cooled	Pressurized liquid with recirculating bypass
Air Cleaner	Not Published	Dual element air cleaner (outer and inner element)
Fuel System	Not Published	In-line injection pump
Alternator	Not Published	50 A, 12 V

Pump Type	Not Published	Mechanical
Implement Flow	7.9 gpm	7.9 gpm
Steering Flow	Not Published	4.6 gpm
Total Hydraulic Flow	Not Published	12.5 gpm
Overall Hydraulic Pump Flow	Not Published	12.5 gpm
Hydraulic System Type	Open center	Open center
Rear Remote Hydraulic Flow	Not Published	Not Published
No. of Standard Remote Valves	0	Not Published
No. of Optional Remote Valves	1	1 or 2

Fuel Tank Capacity	7.4 gal	7.4 gal
Coolant Capacity	Not Published	1.3 gal
Crankcase Capacity	Not Published	4.4 qt
Transmission / Hydraulic System Capacity	Not Published	8.5 gal
Front Axle Fluid Capacity	Not Published	6.9 qt

PTO Type	Independent	Independent, electro-hydraulic engagement
PTO Rear	540 rpm	540 rpm
Mid-PTO Availability	Optional, 2,000 rpm	HST: Standard; Gear: Optional (2,000 rpm)
Category, 3-Point Hitch	Category I	Category I
Hitch Lift Capacity	Not Published	1,808 lb
Hitch Lift Capacity (at 24”)	1,433 lb	1,433 lb
Lift Control Type	Not Published	Position control

Transmission Type	Hydrostatic (optional)	Gear: 12x12 synchronized shuttle; HST: 3-range hydrostatic, dual pedal
No. of Speeds	Infinite (hydrostatic)	Gear: 12F/12R; HST: 3-range
Max Travel Speed (Forward)	Not Published	HST: 15.3 mph; Gear: 13.8 mph
Max Travel Speed (Reverse)	Not Published	Gear: 13.10 mph; HST: 10.79 mph
Clutch	Not Published	Gear: 9.4 in disc; HST: Not applicable
Differential Lock & Limited Slip Options	Mechanical differential lock	Mechanical rear differential lock

Frame Type	Not Published	Not Published
Steering	Power steering	Power steering
Brakes	Not Published	Wet disc
Seat Suspension & Adjustability	Not Published	Not Published
Front Axle Type	Mechanical Front Drive (MFD)	4WD
Front Axle Rating	Not Published	Not Published
Drawbar Capacity	Not Published	Not Published

Overall Width	Not Published	54.1 in
Wheelbase	65.9 in	65.9 in
Ground Clearance	Not Published	13 in
Min. Turn Radius without Brakes	Not Published	120 in (left turn); 129.8 in (right turn)
Height to Top of ROPS	88.2 in	88.2 in
Height to Top of ROPS (folded)	68.2 in	68.2 in
Height to Top of Cab Model	Not Published	Not Published
Overall Length	117.2 in	117.2 in

Tractor Weight (Base)	2,469 lb	Gear: 2,434 lb; HST: 2,469 lb
Weight with ROPS and Loader	Not Published	Not Published
Weight with Cab and Loader	Not Published	Not Published

Tire Size & Options	Not Published	R1 Agricultural, R3 Turf, R4 Industrial
R1 Agricultural - Front	Not Published	7-14
R1 Agricultural - Rear	Not Published	11.2-24
R3 Turf - Front	Not Published	25x8.50-14
R3 Turf - Rear	Not Published	41x14.00-20
R4 Industrial - Front	Not Published	25x8.50-14
R4 Industrial - Rear	Not Published	43x16-20

Quick Attach Loader System	Not Published	200LC: tool-free quick-mount system; optional skid-steer quick-attach plates
Loader Model	L330	200LC
Loader Lift Height	94.3 in	200LC: 94.3 in (at pivot pin)
Loader Lift Capacity (Full Height)	1,214 lb	200LC: 1,600 lb (at bucket pivot pin, max height)
Loader Breakout Force	1,926 lb	200LC: 2,637 lb (at bucket pivot pin)

Warranty Length & Coverage	Basic 2 years; powertrain 4 additional years (6-year total)	Basic 2 years or 750 hours; powertrain to 6 years or 1,500 hours total

Find a Case IH dealer near you Find a New Holland dealer near you

Case IH Farmall 25A vs New Holland Workmaster 25: Quick Answers

Which has more horsepower, the Case IH Farmall 25A or the New Holland Workmaster 25?

They are effectively tied: both machines are rated at 24.4 hp hp for engine hp.

Which has more PTO horsepower, the Case IH Farmall 25A or the New Holland Workmaster 25?

The New Holland Workmaster 25 leads on pto hp at 19.2 hp hp, compared to 17.1 hp hp for the Case IH Farmall 25A.

Which is heavier, the Case IH Farmall 25A or the New Holland Workmaster 25?

They are effectively tied: both machines are rated at 2,469 lb lb for weight.

Which has more loader lift capacity, the Case IH Farmall 25A or the New Holland Workmaster 25?

The New Holland Workmaster 25 leads on loader lift at 1,600 lb lb, compared to 1,214 lb lb for the Case IH Farmall 25A.

Which has more three-point hitch lift capacity, the Case IH Farmall 25A or the New Holland Workmaster 25?

They are effectively tied: both machines are rated at 1,433 lb lb for 3-pt lift (24 in).

Case IH Farmall 25A vs New Holland Workmaster 25

Category Verdict

Full Spec Sheet

Case IH Farmall 25A vs New Holland Workmaster 25: Quick Answers

More Head-to-Heads

More in the resource center

Look up a tractor

Side-by-side comparison

The Netflix of tractor videos

Tractor guides and articles

Case IH Farmall 25A vs New Holland Workmaster 25

Category Verdict

Full Spec Sheet

Case IH Farmall 25A vs New Holland Workmaster 25: Quick Answers

More Head-to-Heads