John Deere 3025D vs New Holland Workmaster 25

Every published spec for both machines, side by side. The verdict below is computed straight from the spec sheets, not opinion.

Across 8 measurable specs, the New Holland Workmaster 25 leads 4 categories to 3 (1 tied). Machine pages: John Deere 3025D and New Holland Workmaster 25.

Want a third or fourth machine in the mix? Open this matchup in the comparison tool and add up to two more.

Category Verdict

Spec	John Deere 3025D	New Holland Workmaster 25
Engine HP (hp)	24.4 hp	24.4 hp
PTO HP (hp)	▲ 20.7 hp	17.3 hp
Loader Lift (lb)	1,186 lb	▲ 1,600 lb
3-Pt Lift (24 in) (lb)	▲ 2,081.2 lb	1,433 lb
Lift Height (in)	▲ 84 in	72 in
Breakout Force (lbf)	1,704 lbf	▲ 2,637 lbf
Hydraulic Flow (gpm)	8.9 gpm	▲ 12.5 gpm
Travel Speed (mph)	11.1 mph	▲ 14.3 mph

The headline numbers at a glance.

John Deere 3025DNew Holland Workmaster 25

Engine HPhp

▲24.4 hp

PTO HPhp

▲20.7 hp

17.3 hp

Weightlb

—

Loader Liftlb

1,186 lb

▲1,600 lb

3-Pt Lift (24 in)lb

▲2,081.2 lb

1,433 lb

Share↓ Image 𝕏 f ✉

Full Spec Sheet

Every published spec, side by side, including the details the graphs above don't chart.

Spec	John Deere3025D	New HollandWorkmaster 25


PTO Power	20.7 hp	17.3 hp
Alternator	55 A, 12 V	50 A, 12 V
Air Cleaner	Dual element	Not Published
Engine Type	Diesel, water-cooled	3-cylinder, naturally aspirated diesel
Fuel System	Direct injection	In-line injection pump
Displacement	100.1 in³	80.4 in³
No. of Cylinders	3	3
Rated Engine Speed	2400 rpm	2500 rpm
Cooling System Type	Liquid	Pressurized liquid with recirculating bypass
Engine Manufacturer	Yanmar	Mitsubishi
Engine Power (Gross)	24.4 hp @ 400 rpm	24.4 hp
Engine Emissions Constraints	Tier 4	Tier 4B Final

Weight with ROPS and Loader	Not Published	Not Published
Weight with Cab and Loader	Not Applicable	Not Applicable

Warranty Length & Coverage	6-year/2,000-hour powertrain; 2-year/2,000-hour basic (full machine)	6-year limited warranty (2-year bumper-to-bumper + 4-year powertrain)

Pump Type	Single gear	Mechanical
Steering Flow	3.6 gpm	4.6 gpm
Implement Flow	4.8 gpm	7.9 gpm
Total Hydraulic Flow	8.9 gpm	12.5 gpm
Hydraulic System Type	Open center	Open center
Rear Remote Hydraulic Flow	Not Published	Not Published
Overall Hydraulic Pump Flow	8.9 gpm	12.5 gpm
No. of Optional Remote Valves	Up to two (optional)	1 or 2
No. of Standard Remote Valves	Not Published	0

PTO Rear	540 rpm (6-spline)	540 rpm
PTO Type	Not Published	Independent, electro-hydraulic engagement
Lift Control Type	Position control	Position control
Hitch Lift Capacity	Not Published	1,808 lb
Mid-PTO Availability	Not Applicable	HST: Standard; Gear: Optional
Category, 3-Point Hitch	Category 1	Category I
Hitch Lift Capacity (at 24”)	2,081.2 lb @ 24 in behind link arms	1,433 lb

R3 Turf - Rear	41X14-20	41X14.00-20
R3 Turf - Front	27X8.50-15	25X8.50-14
Tire Size & Options	R1 Bar, R3 Turf, R4 Industrial	R1 Agricultural, R3 Turf, R4 Industrial
R4 Industrial - Rear	15.00-19.5	43X16-20
R4 Industrial - Front	25X8.50-14	25X8.50-14
R1 Agricultural - Rear	11.2-24	11.2-24
R1 Agricultural - Front	7-14	7.0-14

Coolant Capacity	Not Published	5.2 qt
Crankcase Capacity	1.1 gal	4.4 qt
Fuel Tank Capacity	10.0 gal	7.4 gal
Front Axle Fluid Capacity	1.0 gal	6.9 qt
Transmission / Hydraulic System Capacity	9.2 gal	8.5 gal

Loader Lift Height	84.0 in	72 in
Loader Breakout Force	1,704 lb	2,637 lb
Quick Attach Loader System	Quick-change attachment carrier	200LC: Quick Mount system; optional skid steer quick attach plates
Loader Lift Capacity (Full Height)	1,186 lb	1,600 lb

Clutch	Not Published	HST: Not Applicable; Gear: 9.4 in
No. of Speeds	8F/8R	HST: 3-range; Gear: 12F/12R
Transmission Type	8F/8R synchromesh shuttle shift gear transmission	HST: 3-range hydrostatic; Gear: 12x12 mechanical shuttle
Max Travel Speed (Forward)	11.1 mph	HST: 14.33 mph; Gear: 13.78 mph
Max Travel Speed (Reverse)	11.6 mph	HST: 10.79 mph; Gear: 13.10 mph
Differential Lock & Limited Slip Options	Not Published	Mechanical rear differential lock

Brakes	Not Published	Wet disc
Steering	Not Published	Power steering
Frame Type	Not Published	Not Published
Front Axle Type	MFWD (4WD)	4WD (FWD)
Drawbar Capacity	Not Published	Not Published
Front Axle Rating	Not Published	Not Published
Seat Suspension & Adjustability	Not Published	Not Published

Wheelbase	62.6 in	65.9 in
Overall Width	57.3 in	54.1 in
Ground Clearance	13.0 in	13 in
Height to Top of ROPS	Not Published	88.2 in
Height to Top of Cab Model	Not Applicable	Not Applicable
Height to Top of ROPS (folded)	Not Published	68.2 in
Min. Turn Radius without Brakes	Not Published	120 in
Overall Length with 3-Point Hitch	111.2 in	131 in

John Deere 3025D vs New Holland Workmaster 25: Quick Answers

Which has more horsepower, the John Deere 3025D or the New Holland Workmaster 25?: They are effectively tied: both machines are rated at 24.4 hp hp for engine hp.
Which has more PTO horsepower, the John Deere 3025D or the New Holland Workmaster 25?: The John Deere 3025D leads on pto hp at 20.7 hp hp, compared to 17.3 hp hp for the New Holland Workmaster 25.
Which has more loader lift capacity, the John Deere 3025D or the New Holland Workmaster 25?: The New Holland Workmaster 25 leads on loader lift at 1,600 lb lb, compared to 1,186 lb lb for the John Deere 3025D.
Which has more three-point hitch lift capacity, the John Deere 3025D or the New Holland Workmaster 25?: The John Deere 3025D leads on 3-pt lift (24 in) at 2,081.2 lb lb, compared to 1,433 lb lb for the New Holland Workmaster 25.

More Head-to-Heads

Category Verdict

Spec	John Deere 3025D	New Holland Workmaster 25
Engine HP (hp)	24.4 hp	24.4 hp
PTO HP (hp)	▲ 20.7 hp	17.3 hp
Loader Lift (lb)	1,186 lb	▲ 1,600 lb
3-Pt Lift (24 in) (lb)	▲ 2,081.2 lb	1,433 lb
Lift Height (in)	▲ 84 in	72 in
Breakout Force (lbf)	1,704 lbf	▲ 2,637 lbf
Hydraulic Flow (gpm)	8.9 gpm	▲ 12.5 gpm
Travel Speed (mph)	11.1 mph	▲ 14.3 mph

The headline numbers at a glance.

John Deere 3025DNew Holland Workmaster 25

Engine HPhp

▲24.4 hp

PTO HPhp

▲20.7 hp

17.3 hp

Weightlb

—

Loader Liftlb

1,186 lb

▲1,600 lb

3-Pt Lift (24 in)lb

▲2,081.2 lb

1,433 lb

Share↓ Image 𝕏 f ✉

Full Spec Sheet

Every published spec, side by side, including the details the graphs above don't chart.

Spec	John Deere3025D	New HollandWorkmaster 25


PTO Power	20.7 hp	17.3 hp
Alternator	55 A, 12 V	50 A, 12 V
Air Cleaner	Dual element	Not Published
Engine Type	Diesel, water-cooled	3-cylinder, naturally aspirated diesel
Fuel System	Direct injection	In-line injection pump
Displacement	100.1 in³	80.4 in³
No. of Cylinders	3	3
Rated Engine Speed	2400 rpm	2500 rpm
Cooling System Type	Liquid	Pressurized liquid with recirculating bypass
Engine Manufacturer	Yanmar	Mitsubishi
Engine Power (Gross)	24.4 hp @ 400 rpm	24.4 hp
Engine Emissions Constraints	Tier 4	Tier 4B Final

Weight with ROPS and Loader	Not Published	Not Published
Weight with Cab and Loader	Not Applicable	Not Applicable

Warranty Length & Coverage	6-year/2,000-hour powertrain; 2-year/2,000-hour basic (full machine)	6-year limited warranty (2-year bumper-to-bumper + 4-year powertrain)

Pump Type	Single gear	Mechanical
Steering Flow	3.6 gpm	4.6 gpm
Implement Flow	4.8 gpm	7.9 gpm
Total Hydraulic Flow	8.9 gpm	12.5 gpm
Hydraulic System Type	Open center	Open center
Rear Remote Hydraulic Flow	Not Published	Not Published
Overall Hydraulic Pump Flow	8.9 gpm	12.5 gpm
No. of Optional Remote Valves	Up to two (optional)	1 or 2
No. of Standard Remote Valves	Not Published	0

PTO Rear	540 rpm (6-spline)	540 rpm
PTO Type	Not Published	Independent, electro-hydraulic engagement
Lift Control Type	Position control	Position control
Hitch Lift Capacity	Not Published	1,808 lb
Mid-PTO Availability	Not Applicable	HST: Standard; Gear: Optional
Category, 3-Point Hitch	Category 1	Category I
Hitch Lift Capacity (at 24”)	2,081.2 lb @ 24 in behind link arms	1,433 lb

R3 Turf - Rear	41X14-20	41X14.00-20
R3 Turf - Front	27X8.50-15	25X8.50-14
Tire Size & Options	R1 Bar, R3 Turf, R4 Industrial	R1 Agricultural, R3 Turf, R4 Industrial
R4 Industrial - Rear	15.00-19.5	43X16-20
R4 Industrial - Front	25X8.50-14	25X8.50-14
R1 Agricultural - Rear	11.2-24	11.2-24
R1 Agricultural - Front	7-14	7.0-14

Coolant Capacity	Not Published	5.2 qt
Crankcase Capacity	1.1 gal	4.4 qt
Fuel Tank Capacity	10.0 gal	7.4 gal
Front Axle Fluid Capacity	1.0 gal	6.9 qt
Transmission / Hydraulic System Capacity	9.2 gal	8.5 gal

Loader Lift Height	84.0 in	72 in
Loader Breakout Force	1,704 lb	2,637 lb
Quick Attach Loader System	Quick-change attachment carrier	200LC: Quick Mount system; optional skid steer quick attach plates
Loader Lift Capacity (Full Height)	1,186 lb	1,600 lb

Clutch	Not Published	HST: Not Applicable; Gear: 9.4 in
No. of Speeds	8F/8R	HST: 3-range; Gear: 12F/12R
Transmission Type	8F/8R synchromesh shuttle shift gear transmission	HST: 3-range hydrostatic; Gear: 12x12 mechanical shuttle
Max Travel Speed (Forward)	11.1 mph	HST: 14.33 mph; Gear: 13.78 mph
Max Travel Speed (Reverse)	11.6 mph	HST: 10.79 mph; Gear: 13.10 mph
Differential Lock & Limited Slip Options	Not Published	Mechanical rear differential lock

Brakes	Not Published	Wet disc
Steering	Not Published	Power steering
Frame Type	Not Published	Not Published
Front Axle Type	MFWD (4WD)	4WD (FWD)
Drawbar Capacity	Not Published	Not Published
Front Axle Rating	Not Published	Not Published
Seat Suspension & Adjustability	Not Published	Not Published

Wheelbase	62.6 in	65.9 in
Overall Width	57.3 in	54.1 in
Ground Clearance	13.0 in	13 in
Height to Top of ROPS	Not Published	88.2 in
Height to Top of Cab Model	Not Applicable	Not Applicable
Height to Top of ROPS (folded)	Not Published	68.2 in
Min. Turn Radius without Brakes	Not Published	120 in
Overall Length with 3-Point Hitch	111.2 in	131 in

John Deere 3025D vs New Holland Workmaster 25: Quick Answers

Which has more horsepower, the John Deere 3025D or the New Holland Workmaster 25?

They are effectively tied: both machines are rated at 24.4 hp hp for engine hp.

Which has more PTO horsepower, the John Deere 3025D or the New Holland Workmaster 25?

The John Deere 3025D leads on pto hp at 20.7 hp hp, compared to 17.3 hp hp for the New Holland Workmaster 25.

Which has more loader lift capacity, the John Deere 3025D or the New Holland Workmaster 25?

The New Holland Workmaster 25 leads on loader lift at 1,600 lb lb, compared to 1,186 lb lb for the John Deere 3025D.

Which has more three-point hitch lift capacity, the John Deere 3025D or the New Holland Workmaster 25?

The John Deere 3025D leads on 3-pt lift (24 in) at 2,081.2 lb lb, compared to 1,433 lb lb for the New Holland Workmaster 25.

John Deere 3025D vs New Holland Workmaster 25

Category Verdict

Full Spec Sheet

John Deere 3025D vs New Holland Workmaster 25: Quick Answers

More Head-to-Heads

More in the resource center

Look up a tractor

Side-by-side comparison

The Netflix of tractor videos

Tractor guides and articles

John Deere 3025D vs New Holland Workmaster 25

Category Verdict

Full Spec Sheet

John Deere 3025D vs New Holland Workmaster 25: Quick Answers

More Head-to-Heads