Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is part two of a DIY clutch replacement on a New Holland Boomer 40, picking up with the tractor already split and the clutch exposed. It covers power washing the dirty components, positioning a crane and jacks to support the tractor halves, and setting up a Harbor Freight jack to pull the front section back for clutch access. It's a hands-on, in-progress repair log best suited to owners doing their own clutch job who want to see the splitting setup and rigging process, not a finished how-to summary.
Appears to be an owner-operator documenting their own DIY tractor repair as it happens.
After removing the tower, floor, and shields the exposed components were filthy, and you can't work on dirty parts, so it needed a second power wash.
A crane centered over the engine, jacks placed underneath as a backup in case the crane hydraulics fail, and a Harbor Freight racing jack set on cinder blocks to pull the front section back.
Take out the remaining bolts and move the front section backward, which then exposes the clutch for replacement.